i would like to say 916 views and not one thanks for this software and how to use so i will thank myself cheers jimmy p and yes it does open 5c cards but not with a minisdk you need a phoenix 3.1 only 25.00 to buy
rom 11 b06 -b08 unlocker
- Thread starter JimmyP
- Start date
K
Inactive User
lol jimmy i do have a minisdk and a pheonix... and no it doesnt unlock.. but anywya thanks for putitng my hopes up 
yes kalipo it does open 5c cards mate
read this
"ok this is how i have unlocked 10 ntl 5c01 b08 cards
its a bit hit and miss but it does work
first change the provider from 5c01 to 5c16
then change the four 0000 to 4e69 (nipper)
use bug delay 157000 0r 257000
at the bottom you will see attempts after about 25 attempts stop
and try to read ithe card in nagra edit4 if you cant read it repeat
using alternate bug delay of 157000 or 257000 as i say
its very hit and miss on some cards i have had to repeat the
action just twice and on others more 10 times
please post your successes so that other know that it works"
when i did my cards they are provider 5401 it finds the delays and you must let in run until it say it seems the rom is open he he he
then it should be ok to read in nagraedit
i fooked a card up trying a minsdk programmer and its what they called looped cant get an atr on it so it will become a ice scrapper for the winter mate lol
read this
"ok this is how i have unlocked 10 ntl 5c01 b08 cards
its a bit hit and miss but it does work
first change the provider from 5c01 to 5c16
then change the four 0000 to 4e69 (nipper)
use bug delay 157000 0r 257000
at the bottom you will see attempts after about 25 attempts stop
and try to read ithe card in nagra edit4 if you cant read it repeat
using alternate bug delay of 157000 or 257000 as i say
its very hit and miss on some cards i have had to repeat the
action just twice and on others more 10 times
please post your successes so that other know that it works"
when i did my cards they are provider 5401 it finds the delays and you must let in run until it say it seems the rom is open he he he
then it should be ok to read in nagraedit
i fooked a card up trying a minsdk programmer and its what they called looped cant get an atr on it so it will become a ice scrapper for the winter mate lol
K
Inactive User
i tried that and it said card unlocked.. i click the blue env and it locked up again thats all it does is lock up...
thats all it does is lock up...
K
Inactive User
on the tutorial it sayspres the blue env to install ghost.. i just tried doing it hang on ill give it another few 100 trys..
K
Inactive User
umm... ayway i have tried that way and my card provider is now either 0000 or ffff i think it killed the provider on it but nagraedit reads the card at 5c.. umm.. strange.. i have to keep deleing my internet files to actually get it to read.. ill keep at it.. ahh also when i enter 5c16 it says check dts :|
do you get something like this?
1) Calibration is: 232.669972981317 Mhz , Acc:5,Use Tsc:Yes
2) Building Bug Table...
2) Using Encrypted Send Mehtod..
3) Encrypting Ecm...
et_Ifs Error!
ChkBC: C=01 from card should be C=70.
Found the Delay for 1000 @ Time:176860
Set_Ifs Error!
ChkBC: C=01 from card should be C=70.
Found the Delay for 100 @ Time:176460
Set_Ifs Error!
ChkBC: C=01 from card should be C=70.
Set_Ifs Error!
ChkBC: C=01 from card should be C=70.
Set_Ifs Error!
ChkBC: C=01 from card should be C=70.
Found the Delay for 10 @ Time:176440
4) Now Working - Dont Interrupt!
Then a few more chkbc's then:
Something is not going Right(Check DTs ...) @ time:176460 Rx:1240020A005A
1) Calibration is: 232.669972981317 Mhz , Acc:5,Use Tsc:Yes
2) Building Bug Table...
2) Using Encrypted Send Mehtod..
3) Encrypting Ecm...
et_Ifs Error!
ChkBC: C=01 from card should be C=70.
Found the Delay for 1000 @ Time:176860
Set_Ifs Error!
ChkBC: C=01 from card should be C=70.
Found the Delay for 100 @ Time:176460
Set_Ifs Error!
ChkBC: C=01 from card should be C=70.
Set_Ifs Error!
ChkBC: C=01 from card should be C=70.
Set_Ifs Error!
ChkBC: C=01 from card should be C=70.
Found the Delay for 10 @ Time:176440
4) Now Working - Dont Interrupt!
Then a few more chkbc's then:
Something is not going Right(Check DTs ...) @ time:176460 Rx:1240020A005A
K
Inactive User
--------------------------------------------------------------------
1) Calibration is: 2292.56010461997 Mhz , Acc:5,Use Tsc:Yes
2) Building Bug Table...
2) Using Simple Send method!
3) Encrypting Ecm...
--------------------------------------------------------------------
Set_Ifs Error!
Set_Ifs: Failed 2!
Something is not going Right(Check DTs ...) @ time:257000 Rx:12820090
thats all i get with 257000
tried with 157000 and get the same error
1) Calibration is: 2292.56010461997 Mhz , Acc:5,Use Tsc:Yes
2) Building Bug Table...
2) Using Simple Send method!
3) Encrypting Ecm...
--------------------------------------------------------------------
Set_Ifs Error!
Set_Ifs: Failed 2!
Something is not going Right(Check DTs ...) @ time:257000 Rx:12820090
thats all i get with 257000
tried with 157000 and get the same error
K
Inactive User
aye i have set it to 98 .... and im on xp.. if i choose any other it fries my cpu and it restarts ... and my pc isnt slow believe me
K
Inactive User
right upate..
i have found out why its getting dts..
Currently doing it now.. i got card details.. and provider is set at FFFF .. when i changed it to 5c16 i get dts error.. but if i leave it at either FFFF or 0000 it goes through the process fina and says hehe blah blah unlocked.
So now i have to work out why my card is saying FFFF or 0000... umm
i have found out why its getting dts..
Currently doing it now.. i got card details.. and provider is set at FFFF .. when i changed it to 5c16 i get dts error.. but if i leave it at either FFFF or 0000 it goes through the process fina and says hehe blah blah unlocked.
So now i have to work out why my card is saying FFFF or 0000... umm
K
Inactive User
i tried it in 4.1 i dont have 4.0... cant seem to find that :| i heared 4.1 is buggy :|
Similar threads
