rom 11 b06 -b08 unlocker

[bobbyball]

The truth is the software is very hit and miss, i have unlocked 7 bo8 cards all provider 5401, using a dell laptop 400 celeron on win 98 second edition.
Will not unlock anything at all using a 2gb dell on xp.
It has only said on about 3 occassions it has opened the card, but when i checked the cards in nagra they were still disabled.
same as a few of you have stated just keep trying, i know its a pain but every so often it seems to work..

 

[happyjim]

hello peeps i cant seem to find the compatibilty mode im using windows 2000......

 

[happyjim]

this is what i get=
ATR=3FFF9500FF918171A04700444E4153503031312052657642303840
Info=DNASP011 RevB08
Retrieving card info...
Card info retrieved
--------------------------------------------------------------------
1) Calibration is: 2390.29248832764 Mhz , Acc:1,Use Tsc:Yes
2) Building Bug Table...
2) Using Simple Send method!
3) Encrypting Ecm...
----------------------------------------------------

with privelidge instruction .........................any ideas guys an girls

 

[happyjim]

ATR=3FFF9500FF918171A04700444E4153503031312052657642303840
Info=DNASP011 RevB08
Retrieving card info...
Card info retrieved
--------------------------------------------------------------------
1) Calibration is: 2390.29248832764 Mhz , Acc:1,Use Tsc:Yes
2) Building Bug Table...
2) Using Encrypted Send Mehtod..
3) Encrypting Ecm...
--------------------------------------------------------------------
Set_Ifs Error!

THEN GOT THIS ON SAME CARD

 

[gmac]

Hi all Iam attempting to unlock a rom11 with xncs I first tried with my clanzers and no working so I have borrowed a m8's cryptik smartmouse and it has been on the go for 10 minutes so far-has anybody else tried this way? if so approx how long should I give it?

 

[happyjim]

Today, 12:03 AM


hi im trying to unlock a rom11bo8 with xncs 1.8 i have set cabaility mode to windows 98(im using 2000) i click on underdev(middle option)....in provider it says 5c01(excw card) i changed the coa2(nipperk) 0000 to 4e69..bug dely 25700 and selected go this is what i got

ATR=3FFF9500FF918171A04700444E41535030313120526576 42303840
Info=DNASP011 RevB08
Retrieving card info...
Card info retrieved
--------------------------------------------------------------------
1) Calibration is: 2390.29390188028 Mhz , Acc:5,Use Tsc:Yes
2) Building Bug Table...
2) Using Encrypted Send Mehtod..
3) Encrypting Ecm...
--------------------------------------------------------------------
Set_Ifs Error!

with a box over the top saying privilge in struction
i also tried big delay of 15700 and get the same response as above so i tried changing provider to 5c16 and got this

ATR=3FFF9500FF918171A04700444E41535030313120526576 42303840
Info=DNASP011 RevB08
Retrieving card info...
Card info retrieved
--------------------------------------------------------------------
1) Calibration is: 2390.29390188028 Mhz , Acc:5,Use Tsc:Yes
2) Building Bug Table...
2) Using Simple Send method!
3) Encrypting Ecm...
--------------------------------------------------------------------


help wots wrong

 

[trigger2204]

have you tried locating the program not the shortcut right click on it then goto properties then see if the option to run under win 98 is in there? not to sure about 2000 never really used it sorry if this dont help you any m8

 

[ikee531]

Hi Guys
I am trying to read a rom 11 card
it seems its locked
Nagra edit gives me following information


Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 38 40
ROM Revision: 011
EEPROM Revision: RevB08
ProviderID: 5C
CamID: 27 74 3B 97
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
Error, BackDoor reported disable - Card may contain update
Reading ROM11 failed
Closing of COM1 was successful

I have tried XNCS but its giving me error:

ChkBC: C=01 from card should be C=70.
Set_Ifs Error!
ChkBC: C=71 from card should be C=99.
Something is not going Right(Check DTs ...) @ time:167000 Rx:1240020A005A

any ideas how to resolve this

 

[gmac]

wots the error in xncs ?

 

[gmac]

sorry m8 I should of read on

 

[gmac]

which reader are you using and what os are you on?

 

[happyjim]

im on windows 2000

 

[ikee531]

which reader are you using and what os are you on?

Sorry for the delay
I am using Infinity phoenix and OS is win XP

 

[happyjim]

ikee have changed capability mode

 

[JIMLCHIPIT]

i can't get it working with infinity either just runs and doesn't unlock. i've let it go to 200 tries but still no luck.

 

[happyjim]

i cant get it to run so u can still help me,,pls read this thread pages 9.10 + 11

 

[trigger2204]

i can't get it working with infinity either just runs and doesn't unlock. i've let it go to 200 tries but still no luck.

did it say at any point that it was unlocked? but never read in nagra?

 

[JIMLCHIPIT]

no just kept running i stopped at 200 tries!

 

[trigger2204]

try using mrom to repair the card use delay settings 80 20 80 worked for me earlier

 

[pburns]

I had the same prob with a B09 ran for days(using infinity usb pheonix)used a iso proggy with external power supply and it opened.