do i still have to type in the command line minus an address or don't even bother with the command either
just this
Code:
cd \non
cd hal
cm_tuner 19
write
annex_a
write
do i still have to type in the command line minus an address or don't even bother with the command either
no luck connecting m8, the part where you need to put change the mac address i have literally followed the tut to the letter...lol... and put in AA BB CC DD EE FF is this the problem? as i guess everyone using this tut would then have the same mac address....am i supposed to make one up for the modem?
and if you havent got it, get the 250 configuration tool installed it makes changing
all your modem settings a dawdle
it might be quicker to take ur subbed to m8 a few miles with a live feed and do a scan for macsthanks gentlex but i will have to wait until i get a mac address from somewhere
if he has cable broadband yes he sure canif i get a m8 to download scanning software can he do it with his BB connection and send me the macs?
i have downloaded this but every time i try to run it the encountered an error and has to close message pops up
Dont worry about that when you hacked the modem and put all your commandsno luck connecting m8, the part where you need to put change the mac address i have literally followed the tut to the letter...lol... and put in AA BB CC DD EE FF is this the problem? as i guess everyone using this tut would then have the same mac address....am i supposed to make one up for the modem?
yea use this cmreg-ntlhm250-bund03.cm an u also need ur tftp server click on macs of that u found in dhcpforce until u see 1 with tftp server ip adress if ther none just right click on ur network card providing to modem and not through router go status then support then detail and u shuold see ur dhcp server ip address that also tftp server addressdo i have to change the config file when i change the mac addy using n*l 250 config prog at the moment it keeps saying something like cm.bin
m8 b is the 1 u need to use and r u sure that ur tftp server ip address just be sure put ur in dhcpforce and press discovered or right click on ur network card - status - support - details - dchp server ip address and also show us ur the connection status and software status pages of the modem minus ur hfc maci have just used my brother in laws mac he is a few miles away but compatable, i have used n*l 250 configurator but still no connection to internet is there some other settings i should be putting in (see pic) i have tried annex a,b and 3. i am pure n*l
m8 your config file and tftp server are wrong, try the config file that
gentlex told you to try ,and get the tftp settings the way he told you
We use essential cookies to make this site work, and optional cookies to enhance your experience.