sempi
DW Regular
i thought i was not to connect a hacked modem to this as cc already have mac address of it and they would see a different modem on it
help please flashing ambit 250
- Thread starter sempi
- Start date
i thought i was not to connect a hacked modem to this as cc already have mac address of it and they would see a different modem on it
sempi
DW Regular
i have not rebooted pc just the modem, should i try rebooting pc?
and did it work if it did great but u dont need to to put anything in the server also try 192 168 100 2 in the ip address
yes that might be the cuase
sempi
DW Regular
nah nothing worked yet i will try another ip addy and see how it goes
sempi
DW Regular
well tried rebooting pc, tried a different ip addy 192.168.100.2 and still the same, is it safe to try flashed modem in my normal network ethernet connection
u dont need to flash again go into ur net work card again to where u set ur ip and next to general @ the top u will see alternate config and make sure it set automatic then go cmd and type ipconfig and see what address it shows
sempi
DW Regular
it is giving it 192.168.100.10
i didnt see this post ur not going online with the modem ur just setting it up and when ur finish u can spoof nic use ur onboard see if it helps
did it gave u gateway address 192.168.100.1.
sempi
DW Regular
yes
also just tried it on my onboard ethernet connection and getting the same thing no difference even rebooted pc but still getting this page cannot be displayed error
sempi
DW Regular
thanks for all your help so far gentlex but i will have to call it a night as i am back up in 5 hours for work tomorrow (full shift too not just lunch time) so i will give it a go when i get in from work tomorrow. if i havn't smashed it off a wall before then...lol... trust me to tell them to cancel me BB at the end of the month all because they would not give me any discounts anymore on it, they wanted the full £34.99 for 10meg.... looks like i may just have to bite the bullit and tell them just to put me on the 2 meg till i try and get this working.
did u dis able the other card and r u using the 192 addy also reboot the modem and if none of that dont work try cmd again type telnet 192.168.100.1 and see what comes up
sempi
DW Regular
done all of that m8 with my on board ethernetno different, with telnet i get the same as when i hyperterminal
can do the login bit and stop the scanning but then cannot connect to modem thru IE
sempi
DW Regular
tomorrow is another day as i really am going to bounce the modem off the wall if i keep going just now, thanks again for your time on this it is probably something stupid i am doing hopefully a little break from it will help.
alright m8 dont give up we'll get it done
papa2
DW Member +
- Joined
- Mar 15, 2006
- Messages
- 784
- Reaction score
- 97
I did one of these for my m8 last night and had much the same problem as you,
I couldnt connect to 192.168.100.1 and couldnt connect to the modem using
the 250 configuration tool either,
when I rebooted the modem it would connect for a very short while then nothing again, I was getting the limited or no connection warning ,
It was really doing my head in cause I new I had done it right, as a last resort
I connected it to my other PC downstairs and it kicked in first time,
connected upstairs again and nothing, I then unsmacked the card ,still the same ,
then smacked it again and its now working ok,
Anyway my point is try it on another PC it actually might be ok,
and if you havent got it, get the 250 configuration tool installed it makes changing
all your modem settings a dawdle
I couldnt connect to 192.168.100.1 and couldnt connect to the modem using
the 250 configuration tool either,
when I rebooted the modem it would connect for a very short while then nothing again, I was getting the limited or no connection warning ,
It was really doing my head in cause I new I had done it right, as a last resort
I connected it to my other PC downstairs and it kicked in first time,
connected upstairs again and nothing, I then unsmacked the card ,still the same ,
then smacked it again and its now working ok,
Anyway my point is try it on another PC it actually might be ok,
and if you havent got it, get the 250 configuration tool installed it makes changing
all your modem settings a dawdle
sempi
DW Regular
just in from work and decidet to try it on my lappy got in first time!!!!
now i am at the part where i have to enter my usb mac address. sorry for being stupid but is this the mac address of the modem?
now i am at the part where i have to enter my usb mac address. sorry for being stupid but is this the mac address of the modem?
hi m8 thats great news u dont need to do usb mac just leave out and the modem will set a defualt 1
sempi
DW Regular
do i still have to type in the command line minus an address or don't even bother with the command either
