sony bravia 40" with cable tuner

[chrisnasah]

Cool.

Do you all suffer from an issue where when you leave ur tv turned off for a while on standby, the next time you turn it on you have remove the cam and put it back in? Been having that issue since i am using icecrypt with joker.

Can anyone confirm if they got the same issue or not and whether they managed to fix it?

 

[ruud36]

that's the same for me.it might be that when you put the tv on standby it turns the cam access off, so by taking it out and back in again it restarts the cam.that's all i can put it down to

 

[ashley69]

Cool.

Do you all suffer from an issue where when you leave ur tv turned off for a while on standby, the next time you turn it on you have remove the cam and put it back in? Been having that issue since i am using icecrypt with joker.

Can anyone confirm if they got the same issue or not and whether they managed to fix it?

I find this problem intermittent.
Sometimes it will be ok when I switch the Tv back on other times I need to pull the cam out and reinsert.
I suppose someone will have the correct technical answer

 

[JohnDough]

Cool.

Do you all suffer from an issue where when you leave ur tv turned off for a while on standby, the next time you turn it on you have remove the cam and put it back in? Been having that issue since i am using icecrypt with joker.

Can anyone confirm if they got the same issue or not and whether they managed to fix it?

It is a issue with the cam slot software on the Sonys so a update is needed from Sony technical dept.
It happens with all cams I have tried on these sets.

 

[stan12]

Can confirm that I have same problem using Icecrypt with 0.78 and Joker cam with 0.79

 

[eblaster101]

hi ive got the mr 2.24 did what i think you said and still no luck do i have to change the boxkeys and is this my id 5ao1 or is it 40985 please im so close help me when i put the cam in i lose the free to air channels
if ive put up any thing wrong I'M SORRY. DW

Hi noticed you have Matrix reloaded with 2.24 i cant find this UPD file anywhere. The latest i can find for matrix reloaded is 1180.

 

[JohnDough]

Could never get the matrix to work but diablo stealth software works fine.

 

[ish_e]

Could never get the matrix to work but diablo stealth software works fine.

were you able to get diablo cam working with fun / mosc card?

 

[JohnDough]

No only Diablo

 

[eblaster101]

I ordered a blue zeta cam so i can program it with joker but am now reading about cut tracks not allowing you to reprogram it?. I have cas2 but not sure if its got cut tracks.
Cam is 0101 version and is programmed with v293xe

 

[eblaster101]

heres a guide on how to make a jcard. Shows the connetions so you can just solder it up using the diagrams. Can someone confirm where the jcard points are connecting to.

 

[i-zombie]

Cool.

Do you all suffer from an issue where when you leave ur tv turned off for a while on standby, the next time you turn it on you have remove the cam and put it back in? Been having that issue since i am using icecrypt with joker.

Can anyone confirm if they got the same issue or not and whether they managed to fix it?

get a philips one not had a single issue with it,other than some slight stuttering when i first put a hd channel on-its all good now

 

[eblaster101]

need some help guys, hot wired the zeta blue to cas2 and it comes up as an xcam when i connect it with jtag connected. If i open cas2 application first then choose zeta and then insert cam i just get a red light. Please help!

 

[eblaster101]

ok managed to get it to work using the 10pound cas2 thanks guys. ill put some pics up to show you how its done.

 

[dreamer64]

ok managed to get it to work using the 10pound cas2 thanks guys. ill put some pics up to show you how its done.

yes please, is the cas2 all i need?

 

[eblaster101]

yes cas2 thats it, ill make guide in a bit.

 

[neathdrew]

yes please, is the cas2 all i need?

cas2 will flash the cam but not program a smartcard

 

[eblaster101]

RapidShare: 1-CLICK Web hosting - Easy Filehosting

 

[Methanoid]

need some help guys, hot wired the zeta blue to cas2 and it comes up as an xcam when i connect it with jtag connected. If i open cas2 application first then choose zeta and then insert cam i just get a red light. Please help!

trying to PM you but for some reason you've disabled all PM and contact forms!!

 

[lagerlout]

Silly question but does the cable go into the aerial socket through an adaptor? I just got a kdl4045500 and curious for future reference