sony bravia 40" with cable tuner

Sorry to hijack the thread but is talkback an issue with these tv's?
 
From what I have read so far I just need a Icecrypt cam like old free x tv one? and then put 079 joker software on it but is a card necessary as well.

Have a few old cams would any of them suit please Magic, dragon, Aston, NP4 Viaccess Freecam.

Thanks for any help guyz.
 
Got the 32" version of this the other week.

Got a Diablo CAM 2.2 from that auction site, I was lucky enough to be able to borrow a CAS2 to allow me to program it.

Programmed it with Stealth latest version, then dropped a new KEYS.BIN file onto it (Contained details for vi??in etc).

Put into the TV, worked straight away.

SO if you go for a Diablo CAM, drop me an PM, and i'll forward you the files I used.




From what I have read so far I just need a Icecrypt cam like old free x tv one? and then put 079 joker software on it but is a card necessary as well.

Have a few old cams would any of them suit please Magic, dragon, Aston, NP4 Viaccess Freecam.

Thanks for any help guyz.
 
OK loaded the cam and put your keys in but although the cam is seen by the TV still only getting FTA channels.

Can you give me your cam settings as maybe they are different.

Keys are correct in cam as per latest listings.

Ta
 
At work at moment, so this is from memory

In the CAM Config, I turned the Auto PM off (I think it's called that), and for the CAIDS set it to UK. I disbaled all the other Emulations, make sure it using EMU first then Card.

Look in the KEYS section, go to the list edit, find Nagra, and then your provider
Check your KEYS are upto date, you might need to manually update them.

As I mentioned in the PM, check the provider code, as mine was different to what I expected, i.e. it was 5B00 when i expected 5A00

Hope this helps you out.



OK loaded the cam and put your keys in but although the cam is seen by the TV still only getting FTA channels.

Can you give me your cam settings as maybe they are different.

Keys are correct in cam as per latest listings.

Ta
 
I have ordered a sony bravia KDL52Z4500 52"
ITS AN EXPENSIVE TV - still waiting, as shops have not got them in yet.
Might have it next week.

I have bought a diablo cam, pre flashed.. ready..
I assumed you knock up a fun to match the bk-key on it?
am I wrong.. do you do everything on the cam.. or is there 2 ways of doing it.

heres the specs of tv

Picture
# 52" Full HD 1080 BRAVIA LCD Television
# Display Resolution: 1920 x 1080 Pixels
# Dynamic Contrast: 80000:1
# Viewing Angle (?): 178
# Backlight: WCG-CCFL
# BRAVIA ENGINE 2
# Advanced Contrast Enhancer (ACE)
# Input Skip: Manual
# Light Sensor
# Live Colour Creation
# x.v.Colour
# Picture Mode: Vivid/Standard/Cinema
# Theatre Mode
# CineMotion/Film Mode/Cinema Drive
# 24p True Cinema
# Motionflow 200Hz
# Image Blur Reduction
# PhotoTV HD
# USB Photo Viewer
# Picture Frame Mode
# Photo Map
# Power Saving + Picture Off
# Power Saving Mode: High/Low/Off
# 14:9 Mode
# 4:3 Mode
# Smart Mode
# Wide Mode
# Zoom Mode
# AFD (Auto Format Detect)
# Auto Noise Reduction
# Digital Comb Filter
# 10 Bit Panel
# Picture In Picture
# Picture & Picture
# Screen Aspect Ratio: 16:9
Video Signal
# 576i / 480p / 576p / 1080i / 720p / 1080p: (HDMI?/Component) / 24p input: (HDMI?/Component)
Colour System
# NTSC 3.58/4.43 (Video In)
# PAL
# Secam
Audio
# Digital Amplifier
# S-Force Front Surround
# Voice Zoom
# Power Output (W): 9W + 9W (Total 18W), Woofer 12W
# Sound Mode: Dynamic/Standard/Clear Voice
# Steady Sound
# Dolby? Digital
# Dolby? Digital Plus
# Auto Volume Adjustment
# Speaker Off
Timer
# Clock
# Sleep Timer
# On/Off Timer (with Clock setting)
Tuning
# Analogue Terrestrial Tuner
# Digital Terrestrial Tuner (MPEG-2)
# Digital TV Cable Tuner (with supported operators)
# Favourite Channels
# Auto Labelling
# Auto Start Up/Tuning
# Channel Skip
# No. of Tuners: 1
# Station Labelling
Teletext
# EPG (NexTView/Digital EPG)
Sound System
# B/G / D/K / I / L / NICAM
Menu
# XrossMediaBar? (XMB?)
# Auto Standby
# OSD Menu
# Parental Lock
# Programme Index Table
Connections:
# Digital Audio Output (optical)
# HDMI? Inputs: 3
# HDMI? PC Signal Capability
# PC Input (15pin D-Sub) + Audio In
# Component Inputs: 1
# Composite Video In
# 4 Pin (Y/C) In (S Video)
# USB 2.0 Input
# MiniJack (Head/Earphone) (mm) 3.5
# PCMCIA Card Slot
# RCA Audio Out
# RCA AV Input: 3
# RF In
# Scart Inputs (RGB): 2
# BRAVIA Sync
# DLNA Ethernet (Music/Photo)
# Digital Media Port
Other Features
# Colour: Midnight Sky
# Power Consumption (Standby) (W): Less than 0.2
# Power Consumption (W): 320
# Swivel
# Swivel Range: 20? left/right
# Logo Illumination
# Dimensions:
- With Table Stand (W x H x D) 128.1 x 88.2 x 34.6 cm
- Without Table Stand (W x H x D) 128.1 x 83.9 x 13.5 cm
# Weight:
- With Table Stand : 41Kg
- Without Table Stand: 34kg
 
Some guyz have it going with a diablo cam but as yet have not had any luck myself .No card needed just a special keybin file flashed to cam..

I also have a dragon cam so if anyone has a predator269 file with it on it please pm me.
ta
 
Last edited:
@Shep - What is your CAM Flashed with ?

You should be able to do it on the CAM itself, but you will have to enter the keys when they roll.

You can program the CAM with your own made up BK, and then make your own fun or mosc.

I have a 32" version working with the Stealth image.
 
Right can eliminate dragon cam as TV will not recognise it.

Put boxkey in Diablo and tried a fun5card with latest file but still not clearing.

Doing my head in at this stage:Angryfire
 
Last edited:
Does anyone now if this works with panasonic and samsung ,



as i have

2xpanasonic lcds
1xpanasonic plasma
2x samsung lcds


and all have this big slot thing at the back which i think takes a cam


sorry to be such a newbiw but clueless on this a

also when i look a the cams on the net it just looks like a card slot where would u connect the feed from the cc company


cheers for any help Yorkie1
 
Does anyone now if this works with panasonic and samsung ,



as i have

2xpanasonic lcds
1xpanasonic plasma
2x samsung lcds


and all have this big slot thing at the back which i think takes a cam


sorry to be such a newbiw but clueless on this a

also when i look a the cams on the net it just looks like a card slot where would u connect the feed from the cc company


cheers for any help Yorkie1

dvb-t tuners have this slot also if u want cable u will need a tv with a dvb-c tuner not just a cam slot, my toshiba 37" lcd has a slot but no dvb-c tuner
 
Right can eliminate dragon cam as TV will not recognise it.

Put boxkey in Diablo and tried a fun5card with latest file but still not clearing.

Doing my head in at this stage:Angryfire


Wheeeeeeeee got it sorted finnally all working great now thanks to you guyz!!!:Bounce::Bounce:
 
how cxan u tell if it has that tuner


Only the top end Sonys W and Z series not sure about the lower models in the Bravia range have it 'cos they are European universal sets most of the other manufacturers use the cheapest local tuner for the area the sets are sold in, E.G. U.K UHF only .
 
@Shep - What is your CAM Flashed with ?

You should be able to do it on the CAM itself, but you will have to enter the keys when they roll.

You can program the CAM with your own made up BK, and then make your own fun or mosc.

I have a 32" version working with the Stealth image.

thing is mate, tv is not here yet, its a new model , will be here next week I think.
I have a zeta blue cam pre-flashed with nagra and boxkey at the moment .
I have also got a satbox doing nowt upstairs.

so until I get the telly , i have not done anything yet
 
Back
Top