Hi Phant0m
The Blind scan on the TM5402HD still finding high symbol rate 45,000 when low symbol rate is in use,
In testing ver 1.18p there is no improvement in the blind scan,
Example on Telstar 11N @ 37.5 west this active transponder 11657H 5880 in DVB-S2 when I scan with the TM5402HD the receiver finds 11660H 45,000 that is not an active transponder as it is an error,
This has been a problem with the blind scan with ver 1.17p & all previous software versions when the blind scan finds a low symbol rate below 6000 it gets confused sometimes & gives a reading of 45,000
A better blind scan configuration will probably solve this recurring error in the data found with the current blind scan software,
If you could change the blind scan to this more advanced version Blind Scan Configuration it will help with the low symbol rate capture that was easy to find on the TM1000/5000 SD series,
Full symbol rate scan in 8 MHz
Full symbol rate scan in 4 MHz
1,000 to 5,000 symbol rate scan in 3 MHz
5,000 to 10,000 symbol rates scan in 5 MHz
Thank you for your continued support for the TM5402HD I hope my suggestion is beneficial to the continued improvement of the Blind Scan.