Midnight Tboy
Inactive User
- Joined
- Feb 23, 2008
- Messages
- 851
- Reaction score
- 7
one thing I did notice.
When I'm testing the wires....I have the multimeter set to 200ohms.
On the ones with resistors attached the reading would be about 100-102ohms which is fine.
On the ones without the reading is something like 1 or 2 or whatever (constantly moving - but same as when I try touching the 2 multimeters together)
Now on the switching diode...I dont seem to get a reading from that one. At first I thought I'd broken the diode and grabbed a new one from the pack...but tested the diode either side before soldering anything and it didnt give any readings (but once in while at random seemed to get a reading which would go shortly after?)....whats the best way/setting to test the switching diodes are ok?
When I'm testing the wires....I have the multimeter set to 200ohms.
On the ones with resistors attached the reading would be about 100-102ohms which is fine.
On the ones without the reading is something like 1 or 2 or whatever (constantly moving - but same as when I try touching the 2 multimeters together)
Now on the switching diode...I dont seem to get a reading from that one. At first I thought I'd broken the diode and grabbed a new one from the pack...but tested the diode either side before soldering anything and it didnt give any readings (but once in while at random seemed to get a reading which would go shortly after?)....whats the best way/setting to test the switching diodes are ok?