u dont need to flash it again did u reboot the modem and if that dont work disable ur network card enable again that should sort it out
tried all that m8 even uninstalled and re-installed network card, still cannot get connection to 192.168.100.1 in IE
this is what i am getting in hyperterminal
WARNING: Access allowed by authorized users only.
login: admin
password:
WARNING: It is possible to crash the system, cause a deadlock,
or cause the connection to be shut down via Telnet.
Run commands with caution!
Console now switched to Telnet session...
Scanning DS Channel at 165000000 Hz...
Scanning DS Channel at 171000000 Hz...
cScanning DS Channel at 168000000 Hz...
CM> cd \Scanning DS Channel at 177000000 Hz...
Scanning DS Channel at 176000000 Hz...
Scanning DS Channel at 183000000 Hz...
cmScanning DS Channel at 184000000 Hz...
Scanning DS Channel at 189000000 Hz...
_haScanning DS Channel at 195000000 Hz...
CM> cd \cm_hal
Instance: Console Thread (0x807e1d30)
Active Command Table: CM DOCSIS HAL Commands (cm_hal)
CM -> cm_hal
CM/CmHal> Scanning DS Channel at 192000000 Hz...
Scanning DS Channel at 201000000 Hz...
scaScanning DS Channel at 200000000 Hz...
n_Scanning DS Channel at 207000000 Hz...
stScanning DS Channel at 208000000 Hz...
opScanning DS Channel at 213000000 Hz...
CM/CmHal> scan_stop
Instance: DOCSIS CableModem (0x8079956c)
CM/CmHal> Scanning DS Channel at 219000000 Hz...
CM/CmHal> cd \
Instance: Console Thread (0x807e1d30)
Active Command Table: CM DOCSIS Commands (CM)
CM