Any help with Incubus config?

[wanna]

ineedhelp[email protected]:12001

 

[telewestTUM]

##############################################################################
# incubusCamd configuration file #
# All configuration options in this file observe the same format: #
# <configuration_name>=<configuration_value> #
# #
# Each section are [<section_name>:<option_1>:<option_x>] like. #
# #
# No matter about white spaces on any place or UNIX/DOS style files #
##############################################################################

########################### general configuration ############################
[General]
# Enable (1) or disable (0) background execution
# 0 - Off
# 1 - On
#
background_execution=0

# This sets the level of console output for debugging:
# 0 - No debug messages, 1 - First level debug messages, 2 - Second level debug messages,
# 3 - Print all debug messages
#
debug_level=1

# This option enables (1) or disables (0) the writing of debug information to the
# console.
#
log_to_console=0

# This option enables (1) or disables (0) the writing of console output to a log file
#
log_to_file=1

# When log_to_file is set to 1, this is the path and filename to write console
# ouput to.
#
logfile_name=/media/incubusCamd.log

# This is the path and filename to read SoftCam.Key file
# by default it will be searched in the /var/keys directory
#
softcamfile_name=/var/keys/SoftCam.Key

# This is the path and filename to read prio file
# by default it will be searched in the /var/bin directory, or in /etc, or in /var/keys
#
priofile_name=/var/bin/incubusCamd.prio

# Used to activate on-screen messages. Username and password required if
# HTTP authentication is enabled on enigma.
# 0 - Off
# 1 - On
#
on_screen_messages_show=0
on_screen_messages_username=root
on_screen_messages_password=sifteam
on_screen_messages_key_update=0
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0

# When activated, incubusCamd will listen on the specified port for connections. All
# log activity will be broadcast in real-time to connected clients.
#
console_logs_broadcast=0
console_logs_broadcast_port=666

# Enable/disable incubusCamd web interface (default port is 668).
# 0 - Disable
# 1 - Enable
webif=1
webif_port=668

########################### provider configuration ###########################
#
# All parameters are in hexadecimal notation.
# Each section is defined by the provider id value.
# If you don't know the provider id value then use the provider id "000000" and ca id "0000".
# On provider 000000 caid 0000 goes all provider wich are not declared. If the provider
# is declared then the cam will use the provider founded.
#

[Prov:000000:CaID:0000]
# ----------------------------------------------------------------------------
# this provider is a stand-in for all cards and all caid not declared previously
#
# You can select wich type of priority to assign on each caid/prov combination
# priority name available are: card,emu,cs
# card: internal card reader
# emu: internal emulator
# cs: card share protocols
# each type must be separated by a comma
#
# you can also set to use only cs and nothing more, to do it insert on each comma "cs"
# example: check_priority=cs,cs,cs # only cs in this case
# example: check_priority=card,emu,emu # no cs in this case
# obviously this is not suggested but if you prefer to disable an option you should do it in this way
# you can also declare only one type: check_priority=cs
# or two types: check_priority=cs,emu
# and so on
check_priority=cs,emu,card

# You can select wich protocol will be used first for the current caid/prov combination
# protocol name available are: newcamd,cccam,gbox,radegast,camd33,camd35,aroureos
# each protocol must be separated by a comma
#
# you can also declare only one type: cs_protocol_order=cccam
# or two types: cs_protocol_order=cccam,newcamd
# and so on
cs_protocol_order=cccam,newcamd,gbox,camd35,camd33,radegast,aroureos

# Enable (1) or disable (0) emm process when a cs protocol is used
# 0 - Off
# 1 - On
#
process_emms_on_cs_mode=0

# Enable (1) or disable (0) emm g type process
# 0 - Off
# 1 - On
#
process_emm_g=0

# Enable (1) or disable (0) emm s type process
# 0 - Off
# 1 - On
#
process_emm_s=0

# Enable (1) or disable (0) emm u type process
# 0 - Off
# 1 - On
#
process_emm_u=0

# Enable (1) or disable (0) seca 3 ecm pid handler
# when is set to On, it will try to use seca 3 ecm pid
# before try seca 2 ecm pid, otherwise seca 2 pid will
# be selected firstly
# 0 - Off
# 1 - On
#
seca3_handler=0

#[Prov:000501:CaID:1833]
#check_priority=cs,emu,card
#cs_protocol_order=cccam,newcamd,gbox,camd35,camd33,radegast,aroureos
#process_emms_on_cs_mode=0
#process_emm_g=0
#process_emm_s=0
#process_emm_u=0
#seca3_handler=0

card_server_url=cccam://USER[email protected]:14000

########################### servers configuration ############################
[Servers]
#
# This is the section for the multi-server configuration.
#
# URL of card-server to use, formats are as follows:
#
# newcamd://<username_31>:<password_31>@<hostname>:<port>:<caid_4>:<prov_id_6>/<des_key_14>/[EMM]
# aroureos://@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]
# radegast://@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]
# camd33://<username_10>:<password_10>@<hostname>:<port>:<caid_4>:<prov_id_6>/[aes_key_16]/[EMM]
# camd35://<username_32>:<password_32>@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]
# gbox://<localhost>:<localport>:<password_8>@<peer_address>:<peer_port>:<peer_pass_8>/[EMM]
#
# cccam://<username_20>:<password_32>@<hostname>:<port>/<receive_emu_shared>/[EMM]
# where <receive_emu_shared> should assume value "yes" (without quotes, if you like to receive emus data shared by the server) or "no" (this is assumed by default)
#
#
# NOTE: The "EMM" suffix is optional and tells the card-server client whether
# to send EMM's to the card-server or not. Enabling or disabling this only
# has effect if the card-server is configured to accept emms from this client.
#
# NOTE 2: The "card_server_url" is not the same as previously declared in the prov/caid section
# use how many server as you like
#
# i.e:
#

card_server_url=cccam://USER[email protected]:14000

#card_server_url=cccam://username[email protected]:15000
#card_server_url=gbox://yourname.dyndns.org:6666[email protected]:6666eer_pass
#card_server_url=cccam://usernameassword@hostnameort
#card_server_url=gbox://192.168.1.24:5555[email protected]:4444eer_pass
#card_server_url=newcamd://username[email protected]:10550:0500:028800/0102030405060708091011121314
#card_server_url=radegast://@192.168.0.100:10550:0100:000065
#card_server_url=aroureos://@yourhostname.dyndns.org:10666:0500:007C00
#card_server_url=camd35://username[email protected]:14150:0603:000000
#card_server_url=camd33://username[email protected]:10550:0603:000000 # cam33 without AES encryption
#card_server_url=camd33://username[email protected]:10500:0604:000000/01020304050607080910111213141516 # cam33 with AES encryption

########################### CaIDs tunneling configuration ############################
[CaIDTunnel]
#
# All values are in hex notation
# In this file you can configure what CAIDs/PIDs incubusCamd should tunnel to another CAID
#
# situation 1: this caid, all idents, on all channels will use the tunnel_caid
# caid:tunnel_caid
#
# situation 2: this caid/ident pair will use the tunnel_caid
# caid:tunnel_caid:ident
#
# situation 3: this caid/ident pair, on channel 'sid' will use the tunnel_caid
# caid:tunnel_caid:ident:sid
#
# i.e:
#
#1833:1702:000000:0082 # this one should tunnel premiereHD nagra3 into betacrypt cards
#1833:1702:000000:0081 # this one should tunnel premiereHD nagra3 into betacrypt cards

use that just change server address to yours thats mine with my servers removed if that doesnt work then i dont know whats wrong

SHORTER VERSION

[General]

background_execution=0
debug_level=1
log_to_console=0
log_to_file=1

logfile_name=/media/incubusCamd.log
softcamfile_name=/var/keys/SoftCam.Key
priofile_name=/var/bin/incubusCamd.prio

on_screen_messages_show=0
on_screen_messages_username=root
on_screen_messages_password=sifteam
on_screen_messages_key_update=0
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0

console_logs_broadcast=0
console_logs_broadcast_port=666

webif=1
webif_port=668

[Prov:000000:CaID:0000]

check_priority=cs,emu,card

cs_protocol_order=cccam,newcamd,gbox,camd35,camd33,radegast,aroureos

process_emms_on_cs_mode=0
process_emm_g=0
process_emm_s=0
process_emm_u=0
seca3_handler=0

card_server_url=cccam://USER[email protected]:14000


[Servers]

card_server_url=cccam://USER[email protected]:14000

[CaIDTunnel]

 

[wanna]

do i have to chng attributes to 755 i have just copied and edited your config with m9

 

[wanna]

i had it workin just now but my box keeps rebootin i think i need new chnl list thnks for helpin to fix prob but y is there freezin

 

[telewestTUM]

i had it working just now but my box keeps rebooting i think i need new channel list thnks for helpin to fix prob but y is there freezin

i'd just reflash your box and just scan and find your own channel list

do you want mine? you'll need to change the USALS info but its pretty organised for 28.2e. It has all HDTV transponders which was missing in the default file

Its 1w>42e as that's all i can receive as my dish is mounted on an east facing wall

 

[wanna]

yes please and thank you very much for your help much appreciated , i have had the box nearly 11 months and this the first time that i have seen ne thin on it decode except for my diablo which c+nrdic is now dead on it

 

[Donnchadh]

I started this whole thread!

I'd like to say a great big "Thank You!" to both TelewestTUM and SiKInn for all their help.

Like Wanna, my incubusCamd is now working.

 

[wanna]

one last thing how the hell do i get the channel list to load what proggi is needed thanks again and much respect to you all

 

[telewestTUM]

one last thing how the hell do i get the channel list to load what proggi is needed thanks again and much respect to you all

Relook PCeditor is what i use to edit a db.dat file. That website with the box images i linked to before has latest version

then just FTP the db.dat file to the /VAR/ folder on the box

then restart the box and it'll show up. Once box loads backup change your motor settings and your good to go

 

[wanna]

thnx again pal

 

[wanna]

heelo again thnx for your help b4 , but this time what files do i need for connection of usb hardrive to cube mini with e2

 

[wanna]

my hd channels have gone but the rest are workin any help would be appreciated

 

[georgekamal]

dear experts, i also need some guides that, now i have installed latest sifteam image and some cams in my HD box..the issue is while i change the cam in to "mgcamd+newcs" i got pic from my local seeca card without any config , but if i change the cam in to "incubus+newcs" then my card stoped working., now how i can watch channels with my local seeca card with "incubus+newcs"?
regards-george

 

[bro]

oscam is out now,not sure if that would work mate