Vix on Ultimo keeps crashing after new tuner installed

gonzoarsenal

Inactive User
Joined
Aug 19, 2013
Messages
23
Reaction score
1
Hi
I installed Vix latest image and it was great with no problems.
I then thought I will add another tuner and ordered from a genuine supplier.
I added 30w on a fixed dish but continually it crashes or reads no signal.
The two fixed dishes are 28.2 and 30w

I then reinstalled Openpli but on the occasions the same thing happens.

The tuner I have checked and installed correctly.

When it reads no signal after rebooting it comes alive again.

Even when you change channels on same satellite, it may crash or may not.

Even when I go into menu and come back it reads no signal.

Then a reboot and by magic back on again.

Any ideas?
 
Last edited:

Ferret

Administrator
Staff member
Administrator
Joined
Apr 13, 2007
Messages
12,677
Reaction score
6,637
Location
Yorkshire Born & Bred Leeds !
Hi
I installed Vix latest image and it was great with no problems.
I then thought I will add another tuner and ordered from a genuine supplier.
I added 30w on a fixed dish but continually it crashes or reads no signal.
The two fixed dishes are 28.2 and 30w

I then reinstalled Openpli but on the occasions the same thing happens.

The tuner I have checked and installed correctly.

When it reads no signal after rebooting it comes alive again.

Even when you change channels on same satellite, it may crash or may not.

Even when I go into menu and come back it reads no signal.

Then a reboot and by magic back on again.

Any ideas?
Check the LNB is not faulty maybe by swapping over the lnb's or even swap the tuners around if the symptoms exchange place you have either a lnb fault or a tuner fault.

Hope that makes sense.
 

gonzoarsenal

Inactive User
Joined
Aug 19, 2013
Messages
23
Reaction score
1
Lnb seemed to be problem although it was one i was using before so F knows.
 
TEST
Top