SyXx
Inactive User
- Joined
- Mar 17, 2005
- Messages
- 545
- Reaction score
- 9
A Box I purchased around 8 or 9 months ago developed somewhat of strange fault over the last week. . .
. . . I had installed the latest Cyro Sportster build and when the box was rebooting post flash it was displaying everything as normal, in the correct process , boot logo . . image Info screen, then it suddenly went onto standby !!
It would not boot past the system info screen whatsoever, i immediatly assumed bad flash and IFA'd Gavs nextgen in which it worked fine, booted no problem but strangely enough gave me the channel not available message on everything.
At this Point i decided to IFA Liams Enigma over, as this has remedied any channel not avalable Ive had so far, and it booted up fine, no problems whatsoever . . . So I thought great Ill just ftp the enigma services over and that shall be that . .
. . Wrong !!! Upon reboot after the service files install, it just went straight onto standby as soon as the image info screen appeared.
Im pulling my hair out now and very much of the impression that is indeed a hardware fault and NOT software issue . . . Im looking for anyone whos had this issue before for some information.
Many Thanks
- SyXx
. . . I had installed the latest Cyro Sportster build and when the box was rebooting post flash it was displaying everything as normal, in the correct process , boot logo . . image Info screen, then it suddenly went onto standby !!
It would not boot past the system info screen whatsoever, i immediatly assumed bad flash and IFA'd Gavs nextgen in which it worked fine, booted no problem but strangely enough gave me the channel not available message on everything.
At this Point i decided to IFA Liams Enigma over, as this has remedied any channel not avalable Ive had so far, and it booted up fine, no problems whatsoever . . . So I thought great Ill just ftp the enigma services over and that shall be that . .
. . Wrong !!! Upon reboot after the service files install, it just went straight onto standby as soon as the image info screen appeared.
Im pulling my hair out now and very much of the impression that is indeed a hardware fault and NOT software issue . . . Im looking for anyone whos had this issue before for some information.
Many Thanks
- SyXx