oke i leave the site now for a little while good luck... let me know....
OK, see you later.. I will try a couple more times or leave it for now.
oke i leave the site now for a little while good luck... let me know....
It has gone into coma just like dreamup "waiting for acknowledgement" for the 20 minutes.
When I connect power to the Box it only boots to the same error (SIM 201, error 1, No CA found) and remain there. It does not go any further.your problem is you are confusing everything.
FOLLOW THIS:
The most important thing first is you have a network connection to allow computer to communicate with box.
Are you using null cable straight from computer to box both ends connected to serial port or do you have a usb converter on computer end.
if you are using the usb port on computer you will need to install this driver.http://www.dream-multimedia-tv.de/firmware/dm800se/CP210x_VCP_Win_XP_S2K3_Vista_7.zip
if you are using serial port then no need.
With box OFF Connect box to your computer with null modem cable,ALSO connect box to router using Ethernet once everything is connected power on box while holding power button then release when you see STOP on display and wait it can take a while for ip to appear.
Once you see IP address Type this into your browser and you should get the box flash page.load and flash Bootloader THEN CLICK PAGE BACK,load and flash image this can take a while..Then click PAGE BACK AGAIN.load and flash the bootloader again..then pull out power cable for 10-15 seconds then power up as normal.
ANY tools etc you need are here in downloads section so just look.
try:dreamup patched - Downloads - DigitalWorldz Technology Forum - Satellite, television, consoles, community
and i have added this for you:Sunray flashup - Downloads - DigitalWorldz Technology Forum - Satellite, television, consoles, community
When I connect power to the Box it only boots to the same error (SIM 201, error 1, No CA found) and remain there. It does not go any further.
I will try to force flash bootloader by any means, thanks for all the help. I will keep you posted.yes you have to force flash bootloader.
are you booting holding power button in.??
I will try to force flash bootloader by any means, thanks for all the help. I will keep you posted.
.
PS: I've used two images in above process :
1) - original-SSL76dm800-DE133dv3PHOENIX-dm800-20092010.nfi (assuming it was original)
2) - EDG-Nemesis-2.Beta-dm800-OE-1.6-ramiMAHER.nfi (flashed successfully but caused the error)
By the look of those image 1 was a sim 2 image and you got a NO CA error which means you flashed the wrong image for your sim.
To be honest you done so much its hard to pinpoint what going wrong your images posted don't work so very hard.
Best thing you can do is slow down take the lid off and make sure you know what sim is in there as at the moment its hard for us to know.
Describe the sim sit back and wait for some advice.
By the look of those image 1 was a sim 2 image and you got a NO CA error which means you flashed the wrong image for your sim.
To be honest you done so much its hard to pinpoint what going wrong your images posted don't work so very hard.
Best thing you can do is slow down take the lid off and make sure you know what sim is in there as at the moment its hard for us to know.
Describe the sim sit back and wait for some advice.
I had the box for just over a year now. Bought brand new.@ alyamani how old is your box do you think.?
The box is not available now, it's with a friend.maybe post a picture of the inside of the box, it may help?
thats maybe the best solution let someone else look at the box to get it alive again...
: multi :
but no dobt about the sim inside on the display you see SIM 201 TEAM so its a sim 2.01
as simple as that...
the only thing what goes wrong is the way to flash i thing thats the point somewere you make a mistake to connect the dreambox.. to internet or null modem cable so let the friend tell and let you see the right way...:Laugh:
We use essential cookies to make this site work, and optional cookies to enhance your experience.