Trying to flash moem for first time.
I've connected to modem circuit board using MAX232, this then conencted to my laptop using a serial to USB cable.
I've changed my 10/100 adapter IP to that as stated in aynes Manual
I've started TFTP32 (although inputted no settings or asked it to do anything??)
I've started Hyperterminal & configures the COM connection as per Haynes Manual
When I apply power to modem (Ambit 250), power light comes on.
Am I not meant to be able to see the bott up on Hyperterminal? I see nothing in hyperterminal. also nothing on TFTP32 (although unsure what this for)
Any advice?
Any way to confirm if the modem is 'bricked'??
cheers
I've connected to modem circuit board using MAX232, this then conencted to my laptop using a serial to USB cable.
I've changed my 10/100 adapter IP to that as stated in aynes Manual
I've started TFTP32 (although inputted no settings or asked it to do anything??)
I've started Hyperterminal & configures the COM connection as per Haynes Manual
When I apply power to modem (Ambit 250), power light comes on.
Am I not meant to be able to see the bott up on Hyperterminal? I see nothing in hyperterminal. also nothing on TFTP32 (although unsure what this for)
Any advice?
Any way to confirm if the modem is 'bricked'??
cheers