Zgemma and OpenVPN

[dar1437]

How this look chaps? Please tell me it's correct lol

 

[Grimeire]

It looks like it is connecting the tun but something is killing the connection after it is intialised.

change the verbose setting in your config.conf to 4.
e.g change

You don't have permission to view the code content. Log in or register now.

to

You don't have permission to view the code content. Log in or register now.

if no verbose setting is mentioned then just add verb 4

 

[dar1437]

It looks like it is connecting the tun but something is killing the connection after it is intialised.

change the verbose setting in your config.conf to 4.
e.g change

You don't have permission to view the code content. Log in or register now.

to

You don't have permission to view the code content. Log in or register now.

if no verbose setting is mentioned then just add verb 4

That's certainly done something Al. It's too bit for 1 photo lol

 

[Grimeire]

That's certainly done something Al. It's too bit for 1 photo lol

just upload the log file.

 

[dar1437]

just upload the log file.

Here goes

 

[Grimeire]

everything looks good in that log file. no errors.

run this command from the command line

curl ipinfo.io/ip

and from your phone or any device connected to same internet as the reciever enter IP into google and see do the IP addresses match

 

[dar1437]

everything looks good in that log file. no errors.

run this command from the command line

curl ipinfo.io/ip

and from your phone or any device connected to same internet as the reciever enter IP into google and see do the IP addresses match

root@zgemmah2h:~# curl ipinfo.io/ip
-sh: curl: command not found

 

[Grimeire]

root@zgemmah2h:~# curl ipinfo.io/ip
-sh: curl: command not found

try this command

wget -qO- http://ipecho.net/plain ; echo

that image seems to have a lot stripped from it

 

[dar1437]

try this command

wget -qO- http://ipecho.net/plain ; echo

that image seems to have a lot stripped from it

root@zgemmah2h:~# wget -qO- http://ipecho.net/plain ; echo
wget: bad address 'ipecho.net'

 

[premprop51]

I had problems setting up PIA with ipab. I can comfirm as ive just done it again on a zgemma i55 and had it up and going within 5 mins.
It is a clean image from OpenATV site and it is 6.1.
The files that i uploaded put them FOUR files into a folder called openvpn

Now make sure you install ovenvpn on zgemma before you FTP anything over.
When you FTP the openvpn folder to etc open the openvpn folder “within” filezilla. Now go to the folder named password. Edit the password to the one that is given to you when you login PIA.
Save it. Filezilla will show this being edited.
After that reboot zgemma. Go to openvpn within zgemma. Set for auto start then reboot.
Then when it reboots go to openvpn again and it should be running if not press start.

I have just done this on zgemma i55 with clean flash of OpenATV 6.1.

cheers river but ive followed it to the letter and installed the image that dar installed....but its still the same....

I'm not giving up yet... ill try another image.

cheers for all your help guys

 

[Grimeire]

what error are you getting??

 

[premprop51]

right all....excuse me for being an asshole....ive been trying to use ipvanish instead of pia.

all seems to be working now...although ill try running the commands above just to verify

getting the same as dar:
root@zgemmah2h:~# wget -qO- http://ipecho.net/plain ; echo
wget: bad address 'ipecho.net'
root@zgemmah2h:~#

 

[premprop51]

is that a good thing mate lol?

 

[dar1437]

is that a good thing mate lol?

Lol I'm not too sure?

I found that Telnet went 10 times slower with the VPN on? No IPTV channels clearing, but the provider may have logged my genuine WAN IP and not letting the vpn server through?

 

[premprop51]

lol....

ive just done a network test on my box and its just coming up unconfirmed ip

have u managed to get channels working yet dar?

 

[dar1437]

lol....

ive just done a network test on my box and its just coming up unconfirmed ip

have u managed to get channels working yet dar?

Not yet lol, but it may be the provider?

 

[premprop51]

Have u tried a network test?

 

[dar1437]

Have u tried a network test?

No. Show me the way lol

 

[premprop51]

Menu/setup/system/network/device setup/network test

Green button to start.

 

[Grimeire]

if ye try with the .ovpn file and pasword file i gave ye it will work as it worked for me and ye should be able to confirm using the command below that your external ip has changed.

You don't have permission to view the code content. Log in or register now.

ye can also try to ping 8.8.8.8 and if ye get a response yer VPN is working