Ok mate try this, start from scratch.
Download latest openATV nightly from Zgemma's site....
Download Notepad++
Im going to PM you a CCcam.cfg, open with Notepad++, put in your line details and copy that to the /etc/ folder see picture i attached in previous post. Then a little bit of house keeping...This info below is not my work.
OpenAtv 5.1 guide
You will need a 4gb USB drive and/or a larger USB drive if you want to record programs and the box connect by LAN.
Pre and Install openatv image
1. On PC format USB drive to FAT32 (quick)
2. Unzip ‘openatv-5.1-zgemmas2s_usb.zip’ image
3. Transfer ‘zgemma’ folder to root of USB drive
4. Insert USB into SAT box and Power on.
5. Once ‘USB’ displayed on Box a quick press and release ‘standby’ button on box, this will then display ‘FLSH’
6. If no ‘FLSH’ then use another USB drive as zgemma can be fussy with some makes of USB drive
7. Leave box, it should take 5 mins to flash then it will auto boot, it will boot into the Post Flash Initial Setup Wizard.
Post Flash Initial Setup–( Use remote scroll left right up and down arrows as required)
System boots in German, don’t worry we’ll change that soon
1. Select your TV connectiom type ie HDMI press Ok
2. Select your TV resolution ie 1080i press Ok
3. Select your Refresh rate ie 50mhz press Ok
4. Select ‘English UK’ press Ok
5. Press Ok at the User Interface setup
6. Press Ok to use 'Wizard for Basic'
7. Select 'Check Internet Connection'
8. Press Ok if Internet working
9. Setup Tuner A - Config mode scroll to 'Simple' , Satellite scroll to '28'2e Astra' ,Send DISCqC to 'Yes' leave all other options default, Press Ok
10. Setup Tuner B - Config Mode 'equal to' Press Ok
11. 'No scan Later' press Ok
12. Network setup Press Ok, Press Ok again
13. Press ‘Exit’ again when shown the German channel Bouquets
Housework on box
1. Remove USB Boot drive and Insert your Storage USB drive
2. Menu-setup-system-storage devices-Initialisation ,Select your drive and format it
3. Menu-setup-system-storage devices-Convert ext3 to ext4 ,Select your drive and convert it
4. Menu-info Panel-Plugins- Swap Manager, Blue to create 256mb, Green to activate, yellow to autostart
5. Menu-plugins Green button to add find Systemplugin- 'Autobouquetsmaker' and install
6. Time or channels number on Front LED display? Menu-Setup-Usage&GUI-LED Display ,Change setting as required.
7. Reboot
There is also a youtube video which i used which got me up and running...
YouTube
As for teething problems read my posts there quite straight forward, hope this helps.