So as i was leaving the house yesterday i set my zgemma H.2s to do a software update using the inbuilt updater from menu/setup/software management/software update. And as i do a lot of the time i got the msg "Image not tested with my box bla bla bla" but this is normal and i proceed and leave the house to go do what i needed to do as i have never had any problem before doing this, but when i came home non of my iptv channels worked so i thought it may have been down but after doing some checking i found that nothing that needs the internet is working no updates,iptv player,tsmedia and just general communication on the network to the outside world but i can FTP into the box from another bedroom in my house and there is lights on the back of the Ethernet socket that flash green/orange so im at a loss ive tried two different Ethernet and two routers with same result, And now when i go into the software update option the picture to the top left of screen which is a traffic light type thing doesn't show any colour no red,yellow,green to show how network status is, im running wooshbuild v7 and when i go to menu/information/network it shows an ip address 192.168.0.57 and the mac etc and the green link light goes on and off round about every 15 secs or so. So as you can see im at a loss i know in the update it said something about the kernal getting updated maybe, I thinking it could be some kind of driver error for the Ethernet but dont know how to change drivers also i have tryed to flash a backup from the day before and another but same results and as the box boots it hangs at -55- and -77- on the front screen dont know if that means anything, Any help would be really appreciated thanks.
Zgemma h2s not working after update
- Thread starter ls12crew
- Start date
- Joined
- Dec 3, 2012
- Messages
- 1,729
- Reaction score
- 1,155
when restoring from your backup how are you doing this? via USB or backup manager if there is one in Wooshbuild
when on the command line of you box have you attempted to see if you can access the internet. e.g ping 8.8.8.8
when on the command line of you box have you attempted to see if you can access the internet. e.g ping 8.8.8.8
Similar threads
-
- Sticky
