ok bit of help here please,have installed dish with motor and tested it it runs from south to west np and south east np (manualy)i have dk image on it and when i tell it to go to thor it turns then goes back to the zero position?the bracket it plumb on every way and am sure ive put in the correct settings for lat/long Lat: 56:00:37N (56.01031)
Lon: 3:42:37W (-3.71039)
From your photos, your dish looks to be set up reasonably ok (Motor Elevation 56 degs, Dish declination 22degs, if that wall bracket is definitely plumb, however it will inevitably require a tweak.
You say the motor keeps shifting from 0.8w to Zero. You need to get to the bottom of this first.
Reboot the box and shift the motor to zero, then do a motor reset.
Check your long / lat co-ordindates N/S? E/W?
Move the motor to 0.8w through the box.
Does the motor move and stay fixed on thor?
If so, your box and motor should be ok. If you have a satfinder, use it and tweak the dish / motor position until you get the strongest signal. If you don't, can you get a telly up to that window in the picture? If so, do a postioner setup / tune on the BBC world frequency and more the dish / motor until you get the best snr.
Worth mentioning, those wall brackets aren't the best for motorised setups. They're difficult to get plumb. Use a decent steel pole and T&K brackets mate.