• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Problem channels !help!

pabble

Member +
Joined
Jan 17, 2006
Messages
363
Likes
1
#1
hi all, does anyone have problems with certain uktv channels on the dbox2, I have tried several new images but they are all the same, The channels are severely chirpy and are unwatchable.

Thanks in advance
 

rodboy

VIP Member
VIP Member
Joined
Jan 28, 2007
Messages
1,528
Likes
38
#2
hi all, does anyone have problems with certain uktv channels on the dbox2, I have tried several new images but they are all the same, The channels are severely chirpy and are unwatchable.

Thanks in advance
Sounds like you have a Sagem box. You need to try running it using the gbox EMU. Unfortunately gbox does not AU any more so you need an image with the key copy routine built in........reflash your box with Blade Quad or Lincsat Beta 6. Both these images load up running evocam........let the box software do it's work ie clear all channels, then use the blue button menu structure to copy keys from evocam to gbox, then switch to gbox.
 

pabble

Member +
Joined
Jan 17, 2006
Messages
363
Likes
1
#3
Sounds like you have a Sagem box. You need to try running it using the gbox EMU. Unfortunately gbox does not AU any more so you need an image with the key copy routine built in........reflash your box with Blade Quad or Lincsat Beta 6. Both these images load up running evocam........let the box software do it's work ie clear all channels, then use the blue button menu structure to copy keys from evocam to gbox, then switch to gbox.
hi, its a nokia 2x box that i have, im using pacino 3 with au

i need to define my original post, when i say uktv channels i mean uktv gold, uktv drama etc, there are about 5 that wont work, however what is strange is that the +1 version of the channels work fine .Unfortunatley there is no +1 for all of those that arnt working.

thanks
 
Last edited:

Fergalsworld

VIP Member
VIP Member
Joined
May 5, 2005
Messages
4,390
Likes
72
#4
Take any splitters out of the loop and plug the feed from the wall straight to the box see if the helps if not press red then blue and check the readings you might need a booster
 

pabble

Member +
Joined
Jan 17, 2006
Messages
363
Likes
1
#5
Take any splitters out of the loop and plug the feed from the wall straight to the box see if the helps if not press red then blue and check the readings you might need a booster
thanks for your advice guys but i have just reflashed to cableferret 1.6 and they are working perfect now :) :) :)

Ive never used this image before so lets see how i get on.