gobie with 1.66

[johnny5]

My fathers goldie stopped, so i had ago a reprogramming the card with kelvar1.66, its the one from gazers site (with codes) when i put it in to the machine it didin't work,it has been in now for 12 hours still nothing any suggestions???? forgot to add i went to see if the codes had been entered and it says error???

[ 06 March 2002: Message edited by: johnny5 ]</p>

 

[Steve]

When did it stop ?

I assume the March codes been entered ?

Think there just might be Kevlar 1.67 on that site now ... try that one

 

[johnny5]

the old software just stopped a couple of days ago.the new software has not worked since

 

[cosmoss]

I'd just try reprogramming it m8, make sure in MP6 you're not trying to put the pic hex on the eep chip and vice versa.

 

[Taff]

if memory serves I dont think it will let you mix up the eprom and pic codes..

regards Taff

Right i just tried to program the ee files to the pic chip and I get the error message

Exception in file a:\kev1.67ee.hex, line= 0,index = 14, msg=unexpected end of line,data=: etc.....

so there is protection to stop this mistake from happening..

[ 06 March 2002: Message edited by: TAFF ]</p>

 

[IANB]

I used kev 167 last night thro elvis and its working a o.k.

 

[davidh]

yes m8 use kev 167 or special k both ru

 

[johnny5]

Cheers lads KELVAR 1.67 did the trick <img src="wink.gif" border="0"> <img src="smile.gif" border="0">