in that case I am glad mine took the vix 808 with no problems except the driver date is still showing as 12-12-2013 when i have updated them to 24-12-2013
He does not need to mate he has a original and a clone so he installs the image on the original solo2 replaces the driverd and backsup the image.
You have no original image so you have to work out another way to do this.
mate if its the matter of drivers then try to use trick.simply update the image and when it ask for the restart then no simply replace the driver list and restart after that .
Yes i did this but after restart solo stuck at boot logo and nothing further no ftp also
So your saying after flashing from usb do not restart and you have full FTP access ?
Ill try that tonight, never know that to work though because until reboot drivers to run network are not loaded.
If your saying that does work then maybe you loaded the wrong drivers, for instance BH does not seem to use official released drivers .
Or do you mean updating image online and then sending in older drivers by FTP before restart ?
yes dear friend i mean it .. i did
1. first i copied the driver from clone blackhole images
2. I openatv image before date 15-12-2013 (with usb)
3. then updated from online update
4. it asked for reboot after successfull update
5. I did it no and connect ftp and replaced the drivers which i had already copied from BH clone image
6. Restarted the box . successfully on then it showed Opena tv Boot logo and at front disply only showed SOLO2.
but didnt go further . So i had to replace it with old BH image
Now u can advise me further . May be i m wrong but i think there was some kind diffrence with BH drivers thats why it didnt work or any other file also should be replaced to .
But if you made a sussesfull reboot after the online update why replace the drivers in the first place ?
Am i missing something here ?
You should of backed up the OpenATV drivers and used those before reboot.
the box drivers should be the same as they are from vu and not bh or vix or any image provider.
The box drivers should be the same as they are from Vu and not BH or ViX or any image provider.
So at the point where it appears to hang, can you ping or FTP to the box?
This is getting weirder and weirder.
@Ferret yes I do have a solo2 clone got it a few weeks ago. My box came with BH 2.0.6 which I don't like so I flashed it to ViX 802, set it all up then manually downloaded the driver updates packge and then installed it using the opkg command. Then copied over the old drivers and restarted. The box restarted fine, I then did an online update to get the box to ViX 808 which is where it is at the mo.
Can you upload a copy of the new drivers and the ones that you are using as replacements?
We use essential cookies to make this site work, and optional cookies to enhance your experience.