gooner1966
Inactive User
- Joined
- Dec 19, 2006
- Messages
- 57
- Reaction score
- 0
To fix any corrupt image or Kein System, use IFA. Do not worry about the null modem cable as the crossover cable works just fine but doesn't give you all the flashing info. I only use the null cable when putting dboxes into debug mode.
Make sure all firewalls and antiviruses are off and disable all network cards except for the one you are going to connect to the dbox. assign a static ip address to the network card too otherwise windows dhcp will be trying to assign and ip address. plug everything together but do not power the dbox on, work through the ifa software and then plug in the dbox to the mains. Lade Software and Hallenberg.com should appear and then the flash will occur.
If the dbox does not boot successfully after the happy faces appear on the LCD then the image used is corrupt so just re-flash in the same manner. this should take not more than 5 minutes! be careful when making a 1x image into a 2x image, or vice versa, using the image clone software as this does not always work.
if you need working images pm me.
good luck
If I back up a friends DBOX2 image on my PC using Imagebackup. Will it copy all the channel listing and favorites too?
Then I could reflash my box with a working image.