Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X QSB.

[Lee Adamson]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

yeh i would agree with that however i managed fine, just that i put the cool runner 3v lead e. f in the wrong holes top rather than bottom. Managed to pull it while i was trying to work out what the light was dim, but you learn from your mistakes lol thanks lee

 

[dave24]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

Yes we all have to start somewhere , as long as it doesn`t get expensive in the process

yeh i would agree with that however i managed fine, just that i put the cool runner 3v lead e. f in the wrong holes top rather than bottom. Managed to pull it while i was trying to work out what the light was dim, but you learn from your mistakes lol thanks lee

 

[Lee Adamson]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

ha ha yep ur telling me i started with the kamazake never had an problem until the slim flashed phats are far easier etc. I will try more in the future i hate not beating something, its a learning process.

 

[dave24]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

Welcome to the club

ha ha yep ur telling me i started with the kamazake never had an problem until the slim flashed phats are far easier etc. I will try more in the future i hate not beating something, its a learning process.

 

[Lee Adamson]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

Still waiting on cr lite however i came across a thread that was regarding glitching problems turns out they had programmed cr with the prog button ? when they programmed with it in normal position it solved the glitching problem. As i programmed the cr in program position i wonder if this is why it wasnt glitching ? thanks lee

 

[dave24]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

Have you got your cpu key yet? or is that what you are after , sorry if you have already posted the answer but i can`t be arsed to go through the thread lol.

 

[Lee Adamson]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

No i couldnt get it to boot.

Have you got your cpu key yet? or is that what you are after , sorry if you have already posted the answer but i can`t be arsed to go through the thread lol.

 

[dave24]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

Right , so you got 2 good nand dumps , programmed the coolrunner with Trinity file and created and wrote the ECC file to the nand?

No i couldnt get it to boot.

 

[Lee Adamson]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

Yeh exactly, but programmer cr with program button.

Right , so you got 2 good nand dumps , programmed the coolrunner with Trinity file and created and wrote the ECC file to the nand?

 

[dave24]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

i`m guessing with the red LED being dim that`s because of the fake coolrunner .

Yeh exactly, but programmer cr with program button.

 

[Lee Adamson]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

No it was because i wired the wires to the top when it should been the bottom i sorted that red light was fine after.

i`m guessing with the red LED being dim that`s because of the fake coolrunner .

 

[dave24]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

Right with you , i would now wait for your glitch chip coming.

No it was because i wired the wires to the top when it should been the bottom i sorted that red light was fine after.

 

[Lee Adamson]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

i program it with the switch to program ? or does it make a difference. thanks lee

Right with you , i would now wait for your glitch chip coming.

 

[Abu Baniaz]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

Yes, the switch must be set to program in order to program it, power to unit is also disconnected by doing so. Normal for it to function.

 

[Lee Adamson]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

Ah well i just read on a thread from tx forum prog is future updates only but i believed it was what you said. thanks lee

Yes, the switch must be set to program in order to program it, power to unit is also disconnected by doing so. Normal for it to function.

 

[Lee Adamson]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

I have the cr3 lite glitching but not booting to get my cpu key etc, i havent shortned the blue wire i have lk1 open lk2 bridged lk3 open lk4 1-2 bridged. I have s2 1-6 on all s4 off.

 

[dave24]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

S2 you need 1 and 5 on , that bypasses everything . i normally get it to boot into xell with that.

I have the cr3 lite glitching but not booting to get my cpu key etc, i havent shortned the blue wire i have lk1 open lk2 bridged lk3 open lk4 1-2 bridged. I have s2 1-6 on all s4 off.

 

[Lee Adamson]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

Thanks il give it a go, it can take a while to boot into xell?

S2 you need 1 and 5 on , that bypasses everything . i normally get it to boot into xell with that.

 

[dave24]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

Yes Lee , leave it for a few minutes each time
before you try again

Thanks il give it a go, it can take a while to boot into xell?

 

[Lee Adamson]

Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q

Still not booting into xell with 1 and 5 on, ive tryed 1-8, 1-7,1-6.