Lee Adamson
Inactive User
- Joined
- Oct 8, 2013
- Messages
- 90
- Reaction score
- 8
Re: Coolrunner installed, Nand-X Installed .. Not Booting up , No Nand Read. Nand-X Q
Cant disable because i have knackered the pads i presume its enabled because its not bridged all pads apart from the left side of where it should be bridged is remaining. Good spot, poor eyesight thought it was that one, ive put that right now lol. I still have no glitcher light at all though. thanks again lee
Cant disable because i have knackered the pads i presume its enabled because its not bridged all pads apart from the left side of where it should be bridged is remaining. Good spot, poor eyesight thought it was that one, ive put that right now lol. I still have no glitcher light at all though. thanks again lee
Why aren't you using the FT4R2 point for your CPU_RST (D wire)? Connect to that point with an average of 50-46 cm wire and see if the chip blinks. If you've disabled the oscillator you need to connect the STBY_CLK if you enable it then no need for the STBY_CLK.