Alright, and true yes! Would be a whole lot easier if you had the board in front of you. I could try troubleshooting the issue one by one. What is the first thing you would look for in a case like this. Dead 360 Trinity mobo, Power and Eject buttons beep when pressed. Some of the nand-x solder points seem worn away and the original nand might not have been flashed back correctly. How would I get the nand to be recognized. I have an xbox xenon with the same issue! Very strange, The third box I was able to flash the original nand back without issue, Box had RROD, removed x-clamps, cleaned up, applied new thermal paste, flashed original nand back and BAM, working like new! It is the Trinity and a different Xenon with this issue, Completely unreadable via J-Runner