Will a S-10 Power Supply Work in a S-9 ?

[pixl]

Someone asked me this since I have worked quite a bit on the S-9 supply. But since I don't have a S-10 I thought I'd ask you guys about this.
Not a problem if the connector needs changing.

 

[slugworth]

the s10 power supply connector is silk screened with the voltages,if they match the s9 you have a winner.
There is also a 12v connector for a wire that runs to the back of the receiver which is good for 150ma at least.
voltskis are gnd 5v 5v gnd 12v 24v

 

[slugworth]

the 12v that normally runs to the back I use to run a cpu fan with the receiver cover off.
for quieter operation you can mesh a bigger heatsink to the fins of the stock heatsink.
With no fan the stock heatsink is burn your finger hot.
with a bigger heatsink the cpu runs about 90 degrees F

 

[c4rlo5123]

Pixl/ Slugworth

Thanks for all your help. So I guess the answer will be YES, the S10 power supply can be used on a S9 but some modifications will need to be made on the connector. I will take a picture of a S10 and a S9 so Pixl can take a look and see if we can come up with a diagram.

Thanks everyone:thumbsup: