You can find it on the vu-hd site, click on update tools and select the one dated September.
You can find it on the vu-hd site, click on update tools and select the one dated September.
I've fixed my remote. What you have to do is open it up then take a look at the discs that make up the centre pad. None of the discs where lined up so I removed each in turn and made sure the the centre of the disc sits exactly over the small centre dot on the PCB, this for me fixed the issue.
@moku, also had tuner issues after flashing with v4. Image itself is fine.I flashed the V4 upgrade 4x and same problem, older images give me hw error and newer images boot ok but have tuner hangs problem
@emilioti, did you flash v3 then v4 or was it straight to v4?
I wonder if it's faulty blocks on flash chip maybe?
Just so i'm clear, with v4 flash can you run the old BH 2.0.9 and if so, you have no tuner issue?before v4 update I have blackhole 2.0.9 and everything worked ok
but with blackhole 2.3.0 from vu-hd site I had also tuner issue before v4 update
with bh 2.0.9 in flash no tuner issue
I was thinking maybe driver problem but I would have thought if it was then everyone else using images with the ONLY latest lonrison safe drivers in them would be complaining as a lot of people are using these latest images but with older lonrison safe drivers.with v4 flash and bh 2.0.9 now I have hw error
only v4 images working, bh 2.1.4, but with tuner problem
We use essential cookies to make this site work, and optional cookies to enhance your experience.