stellarocksme
Inactive User
Hi people i just done a 250 followed the haynes guide as i have done before but having trouble getting online, it finds a valid ip address 80.x.x.x.x im using a mac from my subbed modem but no internet ???
I tried followin this bit of the tut again
Now start a new copy of Hyperterminal, this time we change the port to TCP/IP (Winsock)
Done that !, heres where it goes wrong it then says in the tut:-
In the Host address box enter 192.168.100.1
Leave the port number as 23
Broadcom Corporation Embedded Telnet Server (c) 2000-2003
WARNING: Access allowed by authorized users only.
Press enter
login: admin
password: infinite
WARNING: It is possible to crash the system, cause a deadlock,
or cause the connection to be shut down via Telnet.
Run commands with caution!
Console now switched to Telnet session...
Scanning DS Channel at 240000000 Hz...
Scanning DS Channel at 249000000 Hz...
...
It never starts scanning, also i noticed the ENET light is on, thought there was on 2 lights on a modded modem ?. So i let it boot up using my max cable and running hyperterminal and right at the end of it booting i get this message :-
TLV-11[159]: 1.3.6.1.2.1.69.1.6.4.1.12.10 -> 0 (i32)
TLV-11[160]: 1.3.6.1.2.1.69.1.6.4.1.13.10 -> 65535 (i32)
TLV-11[161]: 1.3.6.1.2.1.69.1.6.4.1.14.10 -> 27374 (i32)
TLV-11[162]: 1.3.6.1.2.1.69.1.6.4.1.15.10 -> 27374 (i32)
Time Of Day completed...
Vendor CM Agent w/ BRCM Factory Support processing TLV-11's
162 TLV-11's OK.
Enabling network access for all CPE ports.
BcmCmDocsisStatusEventCodes::kCmIsOperational
Logging event: SW Download INIT - Via Config file unreg.cm
Not logging event ID 2436694024, control for level 7 is 0.
Logging event: SW upgrade Failed after download - Incompatible SW file
Any ideas guys im stock LOL !!
: big crow
I tried followin this bit of the tut again
Now start a new copy of Hyperterminal, this time we change the port to TCP/IP (Winsock)
Done that !, heres where it goes wrong it then says in the tut:-
In the Host address box enter 192.168.100.1
Leave the port number as 23
Broadcom Corporation Embedded Telnet Server (c) 2000-2003
WARNING: Access allowed by authorized users only.
Press enter
login: admin
password: infinite
WARNING: It is possible to crash the system, cause a deadlock,
or cause the connection to be shut down via Telnet.
Run commands with caution!
Console now switched to Telnet session...
Scanning DS Channel at 240000000 Hz...
Scanning DS Channel at 249000000 Hz...
...
It never starts scanning, also i noticed the ENET light is on, thought there was on 2 lights on a modded modem ?. So i let it boot up using my max cable and running hyperterminal and right at the end of it booting i get this message :-
TLV-11[159]: 1.3.6.1.2.1.69.1.6.4.1.12.10 -> 0 (i32)
TLV-11[160]: 1.3.6.1.2.1.69.1.6.4.1.13.10 -> 65535 (i32)
TLV-11[161]: 1.3.6.1.2.1.69.1.6.4.1.14.10 -> 27374 (i32)
TLV-11[162]: 1.3.6.1.2.1.69.1.6.4.1.15.10 -> 27374 (i32)
Time Of Day completed...
Vendor CM Agent w/ BRCM Factory Support processing TLV-11's
162 TLV-11's OK.
Enabling network access for all CPE ports.
BcmCmDocsisStatusEventCodes::kCmIsOperational
Logging event: SW Download INIT - Via Config file unreg.cm
Not logging event ID 2436694024, control for level 7 is 0.
Logging event: SW upgrade Failed after download - Incompatible SW file
Any ideas guys im stock LOL !!
: big crow