Epc2100 help I have hit a problem

[simeonipicker]

This is from an older post, I am having the exact same problem does anyone know how to solve it?

"I am trying to to hack my first Webstar EPC2100, I load up Hyperterminal as wattsy's tut says, get the option press 1, 2 or p and no matter what i try it does not stop when i press p this is driving me insane any help would be much appreciated thx in advance.

Enter '1', '2', or 'p' within 2 seconds or take default...
. .

Performing CRC on Image 2...
Detected LZMA compressed image... decompressing...
Target Address: 0x80010000
...............
Decompressed length: 3932788

Executing Image 2...



3348
NFS client support not included.
usrRoot:usrNetInit: complete!

Hello... and welcome to the wonderful world of vxWorks!!


CmTargetLowLevelInit: Loading Flash/ProgramStore/NonVol drivers...
CmTargetLowLevelInit: Creating singletons for ProgramStore/BootloaderStore/NonV
ol devices...

BcmCmVendorNonVolSettings::GetSingletonInstance: WARNING - the singleton instan
ce is NULL, and someone is accessing it!
[TELEWEST]VENDOR NON-VOL NOT READY
Function: SetHardcodeVendorProfile

Got Attached ProfileRawData ok

Reading Permanent settings from non-vol...
Checksum for permanent settings: 0xa437f0db
Settings were read and verified.


Reading Dynamic settings from non-vol...
Checksum for dynamic settings: 0x5daa4bcd
Settings were read and verified.

Attaching network interface lo0... done.

vvv Interface creation and driver startup beginning vvv

-> Begin DOCSIS CM WAN interface
Creating HAL object for the DOCSIS CableModem interface
Registering DOCSIS CableModem driver

INTC->RevID = 334800A1, MAX_US_QUEUES = 4, numUsQueuesConfigured = 4
-> End DOCSIS CM WAN interface

-> Begin Ethernet LAN interfaces
Creating HAL object for the Ethernet interface
Registering Ethernet driver
-> End Ethernet LAN interfaces

-> Begin USB LAN interface
Creating HAL object for the USB interface
Registering USB driver
-> End USB LAN interface

-> Begin IP Stack interfaces
-> Starting V2 DHCP Client subsystem...
Creating HAL object for IP Stack1 (MAC Addr=00:00:00:00:00)
Registering IP Stack1 driver

Creating HAL object for IP Stack2 (MAC Addr=00:00:00:00:00)
Registering IP Stack2 driver

IP Stack3 not enabled or failed to create and start interface; no other
stacks will be loaded.
-> End IP Stack interfaces

^^^ Interface creation and driver startup complete ^^^

Creating DOCSIS Control Thread...
Creating Propane Control Thread...
Propane version: 1.0.3 (30 Apr 2002)
Instantiating CmSnmpAgent object.
Initializing SNMP subsystem -- version = 93
Creating SNMP agent cablemodem agent
Creating the DOCSIS Forwarder...
Adding DOCSIS CableModem HalIf as the default interface to the DOCSIS Forwarde
r
Adding Ethernet HalIf to the DOCSIS Forwarder
Adding USB HalIf to the DOCSIS Forwarder
Adding IP Stack1 HalIf to the DOCSIS Forwarder
Adding IP Stack2 HalIf to the DOCSIS Forwarder

Starting SNMP subsystem

snmp-wm93Vendor CM Event Log initializing with stored events.
Creating SNMP agent CPE diag agent
SNMP startup complete.
kConsoleIsReadWrite
fpBridge is Not Null !!!
HTTP server initialization complete.
'The cubicle across from you is empty...go now!'

Scanning DS Channel at Starting Frequency : 331000000 Hz...

Type 'help' or '?' for a list of commands...

CM> Scanning DS Channel at Vendor NonVolSetting : 331000000 Hz...
Scanning DS Channel at Vendor NonVolSetting : 321000000 Hz...
Scanning DS Channel at 777000000 Hz...
Scanning DS Channel at 759000000 Hz...
Scanning DS Channel at 298000000 Hz...
Scanning DS Channel at 306000000 Hz...
Scanning DS Channel at 314000000 Hz...
Scanning DS Channel at 322000000 Hz...
Scanning DS Channel at 330000000 Hz...
Scanning DS Channel at 338000000 Hz...
Scanning DS Channel at 346000000 Hz...
Scanning DS Channel at 354000000 Hz...
Scanning DS Channel at 362000000 Hz...
Scanning DS Channel at 370000000 Hz...
Scanning DS Channel at 378000000 Hz...
Scanning DS Channel at 386000000 Hz...
Scanning DS Channel at 394000000 Hz...
Scanning DS Channel at 402000000 Hz...
Scanning DS Channel at 410000000 Hz...
Scanning DS Channel at 418000000 Hz...
Scanning DS Channel at 426000000 Hz...
Scanning DS Channel at 434000000 Hz...
Scanning DS Channel at 442000000 Hz...
Scanning DS Channel at 450000000 Hz...
Scanning DS Channel at 458000000 Hz...
Scanning DS Channel at 466000000 Hz...
Scanning DS Channel at 474000000 Hz...
Scanning DS Channel at 482000000 Hz...
Scanning DS Channel at 490000000 Hz...
Scanning DS Channel at 498000000 Hz...
Scanning DS Channel at 506000000 Hz...
Scanning DS Channel at 514000000 Hz...
Scanning DS Channel at Vendor NonVolSetting : 331000000 Hz...
Scanning DS Channel at Vendor NonVolSetting : 321000000 Hz...
Scanning DS Channel at 522000000 Hz...
Scanning DS Channel at 530000000 Hz...
Scanning DS Channel at 538000000 Hz...
Scanning DS Channel at 546000000 Hz...
Scanning DS Channel at 554000000 Hz...
Scanning DS Channel at 562000000 Hz...
Scanning DS Channel at 570000000 Hz...
Scanning DS Channel at 578000000 Hz...
Scanning DS Channel at 586000000 Hz...
Scanning DS Channel at 594000000 Hz...
Scanning DS Channel at 602000000 Hz...
Scanning DS Channel at 610000000 Hz...
Scanning DS Channel at 618000000 Hz...
Scanning DS Channel at 626000000 Hz...
Scanning DS Channel at 634000000 Hz...
Scanning DS Channel at 642000000 Hz...
Scanning DS Channel at 650000000 Hz...
Scanning DS Channel at 658000000 Hz...
Scanning DS Channel at 666000000 Hz...
Scanning DS Channel at 674000000 Hz...
Scanning DS Channel at 682000000 Hz...
Scanning DS Channel at 690000000 Hz...
Scanning DS Channel at 698000000 Hz...
Scanning DS Channel at 706000000 Hz...
Scanning DS Channel at 714000000 Hz...
Scanning DS Channel at 722000000 Hz...
Scanning DS Channel at 730000000 Hz...
Scanning DS Channel at 738000000 Hz...
Scanning DS Channel at 746000000 Hz...
Scanning DS Channel at 754000000 Hz...
Scanning DS Channel at Vendor NonVolSetting : 331000000 Hz...
Scanning DS Channel at Vendor NonVolSetting : 321000000 Hz...
Scanning DS Channel at 762000000 Hz...
Scanning DS Channel at 770000000 Hz...
Scanning DS Channel at 778000000 Hz...
Scanning DS Channel at 786000000 Hz...
Scanning DS Channel at 794000000 Hz...
Scanning DS Channel at 802000000 Hz...
Scanning DS Channel at 810000000 Hz...
Scanning DS Channel at 818000000 Hz...
Scanning DS Channel at 826000000 Hz...
Scanning DS Channel at 834000000 Hz...
Scanning DS Channel at 842000000 Hz...
Scanning DS Channel at 850000000 Hz...
Scanning DS Channel at 858000000 Hz...
Scanning DS Channel at 93000000 Hz...
Scanning DS Channel at 99000000 Hz...
Scanning DS Channel at 105000000 Hz...
Scanning DS Channel at 111000000 Hz...
Scanning DS Channel at 117000000 Hz...
Scanning DS Channel at 123000000 Hz...
Scanning DS Channel at 129000000 Hz...
Scanning DS Channel at 135000000 Hz...
Scanning DS Channel at 141000000 Hz...
Scanning DS Channel at 147000000 Hz...
Scanning DS Channel at 153000000 Hz...
Scanning DS Channel at 159000000 Hz...
Scanning DS Channel at 165000000 Hz...
Scanning DS Channel at 171000000 Hz...
and so on......................"

 

[tidyant]

Sounds like the connection is not solid on the pins or you have them the wrong way round i had this problem on a 250 i ended up contacting wayneeboy for a pic of what wire went where. Try swapping the cable over.

From the 232 end it to modem should be

Pin 1 - pin 1View attachment 31233
Pin 2 - pin 2
pin 3 - pin 4 rx
pin 4 - pin 3 tx

hope this helps

 

[simeonipicker]

Yes I have checked they are all connected right as I am using the audio cable from a pc

Please help!

 

[gentlex]

hi m8, change the flow control to none or xon/xoff on the com port setting in hyperterminal and see if that helps

 

[berne]

thanks gentlex, this solved some of my issue when it wasnt doing anything when i pressed p, 1 or 2