chrisnasah
Inactive User
- Joined
- Jun 28, 2007
- Messages
- 321
- Reaction score
- 4
Hi Guys found this on another forum which would benefit users learning to flash with everything in one thread. All credit goes to Mark370.
To Stop Channel Scanning.
Code:
cd /cm_hal
scan_stop
-------------------------------
To Change Mac Addresses.
Code:
cd /non-vol/halif
mac_address 1 00:11:22:33:44:55
Usb_mac_address 00:11:22:33:44:56
write
-------------------------------
To Adjust Tuner To NTL/C&W.
Code:
cm_tuner 19
annex_a
cm_annex 3 (pure NTL areas ONLY should enter this)
write
-------------------------------
To Set Downstream Frequency.
Code:
cd ../docsis
ds_frequency 586750000 (change this your area’s DS frequency, this here is c&w)
-------------------------------
To Stop Downloading Updates.
Code:
cd \
cd non-vol\snmp
max_dload_tries 0
write
-------------------------------
Disable Reading Your Modem With Snmp Commands.
Code:
cd /
cd snmp
view_v1v2 Noaccess
cd /
you will have to accept the warning when working with snmp commands IE: (yes)
--------------------------------
Disable Remote Telnet.
Code:
cd non-vol
cd msg-log
telnet_ipstacks 2
write
--------------------------------
Block All Remote Updates.
Code:
cd \
cd non-vol
cd snmp
max_dload_tries 0
write
--------------------------------
250 Serial Numba.
Code:
cd \
cd non-vol
cd snmp_cm
docsDevSerialNumber 00E069C62A22 [ your mac addy in capitals]
write
-------------------------------
Pass & Username Change.
Code:
cd \
cd \non
cd msg
user_name youruser
password yourpassword
write
-------------------------------
USB Mac Change.
Code:
cd \non-vol/halif
usb_mac_address 000:69:A6:2E:23 [same as Ethernet mac but last digit 1 higher or lower]
write
-------------------------------
Change Admin Login Password.
Code:
cd \non
cd msg
http_admin makepassword
write
-------------------------------
To Stop Channel Scanning.
Code:
cd /cm_hal
scan_stop
-------------------------------
To Change Mac Addresses.
Code:
cd /non-vol/halif
mac_address 1 00:11:22:33:44:55
Usb_mac_address 00:11:22:33:44:56
write
-------------------------------
To Adjust Tuner To NTL/C&W.
Code:
cm_tuner 19
annex_a
cm_annex 3 (pure NTL areas ONLY should enter this)
write
-------------------------------
To Set Downstream Frequency.
Code:
cd ../docsis
ds_frequency 586750000 (change this your area’s DS frequency, this here is c&w)
-------------------------------
To Stop Downloading Updates.
Code:
cd \
cd non-vol\snmp
max_dload_tries 0
write
-------------------------------
Disable Reading Your Modem With Snmp Commands.
Code:
cd /
cd snmp
view_v1v2 Noaccess
cd /
you will have to accept the warning when working with snmp commands IE: (yes)
--------------------------------
Disable Remote Telnet.
Code:
cd non-vol
cd msg-log
telnet_ipstacks 2
write
--------------------------------
Block All Remote Updates.
Code:
cd \
cd non-vol
cd snmp
max_dload_tries 0
write
--------------------------------
250 Serial Numba.
Code:
cd \
cd non-vol
cd snmp_cm
docsDevSerialNumber 00E069C62A22 [ your mac addy in capitals]
write
-------------------------------
Pass & Username Change.
Code:
cd \
cd \non
cd msg
user_name youruser
password yourpassword
write
-------------------------------
USB Mac Change.
Code:
cd \non-vol/halif
usb_mac_address 000:69:A6:2E:23 [same as Ethernet mac but last digit 1 higher or lower]
write
-------------------------------
Change Admin Login Password.
Code:
cd \non
cd msg
http_admin makepassword
write
-------------------------------