• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

samsung 2100c

yamaha-r1

Inactive User
Joined
Mar 19, 2005
Messages
70
Likes
0
#1
hi all anyone know how to update these to the new virgin software. i changed the net id to 00019 and held the ch down button but it will only update to the same software not the virgin software.
anyone got any otherway of doing it.
thanks.
ps i am in pure n*l notts
 
Last edited:

ice2004

Inactive User
Joined
Mar 6, 2006
Messages
4,606
Likes
53
#2
Assuming the virgin platform is available whether full or test all you need to do is hold in < up > when powering up and the box will update, you will see numbers counting up. Will take virgin update this way.

Not entirely sure why you changed your netid i advise setting it to the correct netid then using the above method. If it takes the virgin update so be it if not then its not in your area yet.
 
Last edited:

fraggle

Inactive User
Joined
Nov 27, 2004
Messages
158
Likes
0
#3
Im in A T/W area with the Virgin S/W and thought i may be able to get my old Sammy working after it was killed by the 'Starting' problem, but alas it wouldnt take the update..

If u do get it working and ur in an old T/W area could you tell me how u did it?? lol..

Soryy.. just read ur post properly.. pure n*l ect.. doh!! my bad..
 

yamaha-r1

Inactive User
Joined
Mar 19, 2005
Messages
70
Likes
0
#4
there is a post somewhere around on here that says change the net id to 00019 then it will take the update.just tried the <up> m8. didnt work. just says 20-30 .
any other way to make it update.
 

Bally12345

VIP Member
VIP Member
Joined
Dec 27, 2005
Messages
8,297
Likes
139
#5
there is a post somewhere around on here that says change the net id to 00019 then it will take the update.just tried the <up> m8. didnt work. just says 20-30 .
any other way to make it update.
I dont think the virgin update is ready for nottz area quite yet, think you will have to wait until May.