Programming opus card

[nworulz]

I tried programming my first opus card today i put in the latest keys and it wokred for abaout 30 seconds then it said i am unauthorised to view this channel etc what am i doing wrong i am using the 3/6/07 opus files puting them in the opusloader anyone know what i am doing wrong?
Ive uploaded my bin file edited out my bk and ird anyone got any clues whats wrong with it

 

[gooner71]

Hi m8 - Sounds like the image is getting fried as its a single tier image - if it was a Rom 10 MOSC card it would probably be dead and buried!! I dont know much about blockers for images but Im guessing this image doesnt have an effective one as ive just compared it to a working rom 10 image with blocker that ive got here and the bug catcher table size is different?

 

[muskrat]

I tried programming my first opus card today i put in the latest keys and it wokred for abaout 30 seconds then it said i am unauthorised to view this channel etc what am i doing wrong i am using the 3/6/07 opus files puting them in the opusloader anyone know what i am doing wrong?
Ive uploaded my bin file edited out my bk and ird anyone got any clues whats wrong with it

Hi,

Have to agree with gooner71, give this 2 tier image a go, I've tried the pure version on an opus and it works fine.

Hope this helps

Muskrat

 

[nworulz]

getting this problem now maybe i have the wrong script?
Executing Script: C:\Documents and Settings\Administrator\Desktop\cards\loadeep.xvb

Trying to reset card...
Reset Successful

RX ATR : 23 C8 FF FF FD E3 0D F5 0D 35 3D 7D B5 DD FF AF 7F DF
The file size is 8192

TX Data : 31 00 4B A0 CA 00 00 46 5A 43 00 00 40 92 9B 16
16 38 23 A6 00 27 00 00 00 00 00 00 FF FF FF FF
FF FF FF FF FF FF FF FF FF 0B 01 F4 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 5A A5 00 00 00 00 00 00 02 60
RX Data : 00 02 60

Script Error on Line 90
Sc.Read: Timeout Reading Data From Card - 6 Bytes Requested, 3 Bytes Read

 

[muskrat]

getting this problem now maybe i have the wrong script?
Executing Script: C:\Documents and Settings\Administrator\Desktop\cards\loadeep.xvb

Trying to reset card...
Reset Successful

RX ATR : 23 C8 FF FF FD E3 0D F5 0D 35 3D 7D B5 DD FF AF 7F DF
The file size is 8192

TX Data : 31 00 4B A0 CA 00 00 46 5A 43 00 00 40 92 9B 16
16 38 23 A6 00 27 00 00 00 00 00 00 FF FF FF FF
FF FF FF FF FF FF FF FF FF 0B 01 F4 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 5A A5 00 00 00 00 00 00 02 60
RX Data : 00 02 60

Script Error on Line 90
Sc.Read: Timeout Reading Data From Card - 6 Bytes Requested, 3 Bytes Read

What settings are you using in winex, I find unless I use the echostar setting it fails when writing.

Muskrat

 

[nworulz]

same problem anyone.
Can anyone upload the whole winexplorer with the exeep thing the right one.
Thanks in advance

 

[muskrat]

same problem anyone.
Can anyone upload the whole winexplorer with the exeep thing the right one.
Thanks in advance

Hi,

These are the files I used to re-prog my opus a couple of minutes ago, it AU'ed in 34 seconds in a 2110 in pure.

Make sure the phoenix interface is set to 3.579 not 3.68.

Have attached a copy of my write log.

Can you let me know when you have them and I will remove them to save space.

Regards

Muskrat

 

[gooner71]

Hi - an easier way is to load the emu files on as normal then read the card in nagraedit as you would with a mosc card!! Load the image you are going to use in nagraedit - edit it for your IRD and BK and CamId and check the rights and expiry dates are ok then write the card using nagraedit!!

No messing about with winexplorer at all!!!

 

[muskrat]

Hi - an easier way is to load the emu files on as normal then read the card in nagraedit as you would with a mosc card!! Load the image you are going to use in nagraedit - edit it for your IRD and BK and CamId and check the rights and expiry dates are ok then write the card using nagraedit!!

No messing about with winexplorer at all!!!

Hi Gooner71,

Never tried that, will give it a go, thanks for the info.

Regards

Muskrat

 

[nworulz]

Hi - an easier way is to load the emu files on as normal then read the card in nagraedit as you would with a mosc card!! Load the image you are going to use in nagraedit - edit it for your IRD and BK and CamId and check the rights and expiry dates are ok then write the card using nagraedit!!

No messing about with winexplorer at all!!!

Opening of COM1 was successful
ATR String: 23 C8 FF FF FD E3 0D F5 0D 35 3D 7D B5 DD FF AF
7F DF 00 00 00 00 00 00 00 00 00
Error reseting card, ATR string invalid
Closing of COM1 was successful
thats what i got when i tried that

 

[gooner71]

you have to load the emu files on first - flash - Intepp - CryptKey !! once these are loaded to the card it will appear to nagraedit as a normal rom 10 mosc!!!

 

[muskrat]

you have to load the emu files on first - flash - Intepp - CryptKey !! once these are loaded to the card it will appear to nagraedit as a normal rom 10 mosc!!!

Hi gooner71,

Tried your method, works a treat mate :THANKS:

Has dropped the time to prog a tit2 significantly, use infinity unlimited software to erase and write cryptflash/eep/key the use nag 4.1 to write to card.

Only thing I had to do was, as the card was expecting a rom10 image I had to use the single tiered rom10 image and remove the existing tier8 and epx patch the 2 tiers across from a rom11 image, card AU'ed within seconds.

Regards

Muskrat

 

[gooner71]

Sure is a time saver!! It also means you can experiment with rom 10 images knowing full well that if it gets fried you can just erase and start again - better than losing a MoSc card!!

 

[nworulz]

Thanks amte your files worked great