If using latest sw
Hers info from sataid
Now click Menu -> System Setup
When you see the System Setup screen displayed, Press 2 7 7 8 on your remote control
and then the Access Control Option will become available [as shown below]
Click on Access Control
If you Press 2 7 7 8 on your remote control once again, the Access Control will be hidden from sight
now click on CCcam Client Setup
Now click Update Files By Usb
Now select Option 1 CCcam.cfg and click the Red button to load the clines.
Remember to set Load Balance to OFF when running multiple clines.
Once you see CCcam.cfg Load Data OK click the Exit button
Now the clines have been uploaded, we need to activate them.
Click CCcam.cfg Edit
Now you must enter the Password, the default Password is 0 0 0 0
Click CCcam Edit
As you can see all clines are Off-Line and inactive
Highlight / Select each line one by one and click the OK button
this will indicate which line you wish to use, and place a check mark / tick next to the line.
Once you have placed a Tick next to all your lines click the Exit button
You can if you wish chech the status of your lines by going back into the previous Menu you just left.
And once a connection has been established, your clines will then become active, as shown below.
And that's it, you can now exit all Menus.
Now to check all is okay, select a channel your cline will open
May haqve to reboot after making lines active not sure.