Hi again
Does the Hyperter text look like this
Detected CPU .............. BCM3348A1
Ebi Initialized .....................000002020000001C
Sdram Initialized....................
Icache Size: ....................2000
Icache Linesize:.................0010
Dcache Size: ....................2000
Dcache Linesize:.................0010
Sdram access OK......................
Compressed Bootloader detected.......
ImageCSize: ...................007666
ImageLoc: ...................81F80000
Decompression Status: .......00000000
Dcompressed Image Size:......00014995
BSS Initialized......................
TMP Stack initialized................
Perm Stack initialized...............
MemSize: ......................... 8M
Flash detected @0xbe000000
Signature: 3348
Broadcom BootLoader Version: 3.13.2
Build Date: Dec 28 2002
Build Time: 12:22:36
Image 1 Program Header:
Signature: 3348
Control: 0000
Major Rev: 0002
Minor Rev: 0000
Build Time: 2003/7/16 09:12:24 Z
File Length: 906823 bytes
Load Address: 80010000
Filename: vxram_sto.bin
HCS: 3639
CRC
Image 2 Program Header:
Signature: 3348
Control: 0000
Major Rev: 0002
Minor Rev: 0000
Build Time: 2003/7/16 09:12:24 Z
File Length: 906823 bytes
Load Address: 80010000
Filename: vxram_sto.bin
HCS: 3639
CRC: 69db5de2
Enter '1', '2', or 'p' within 2 seconds or take default...
. .
Board IP Address [192.168.100.1]:
Board IP Mask [255.255.255.0]:
Board IP Gateway [0.0.0.0]:
Board MAC Address [00:d0:ff:FF:FF:FF]:
Internal/External phy? (i/e)
Init EMAC, DMA, and MII PHY...
Autonegotiation started, waiting for completion...ERROR: Autonegotiation timeout
...
MAC setup for HalfDuplex
Main Menu:
==========
d) Download and save to flash
g) Download and run from RAM
c) Store icePROM bootloader to flash
b) Boot from flash
e) Erase flash sector
m) Set mode
s) Store bootloader parameters to flash
i) Re-init ethernet
r) Read memory
w) Write memory
Cos its similar to a sb5100 tut i found
See here
http://www.world-of-digital.com/forums/attachment.php?attachmentid=8236&d=1113298114
Only difference is halfduplex and if u check here
http://www.world-of-digital.com/forums/showthread.php?t=59077
You will see that a 250 is also similar
My question is if so cant they be cloned like that
Before i try it i was wondering if that tut works
And can anyone explain how it loads the new firmware