Hi,
I just cant get this darn thing to work, have been at it for weeks know , i have a sammy 2100c tryng to get bk, got a universal jtag from jabs place,
double checked all the connectins on the board , resoldered them alot of times
tdi pin 5 brown
tms pin 7 blue
tck pin 9 black
tdo pin 13 green
vcc pin2 red
gnd pin 20 yelow
the jtag goes into the lpt port on the back of computer, bios setting is on ecp +eep,
turn on the sammy wait till ld20, then press down button, until display goes of and ld40 appears, wait til green lite comes on and o appears on box,
the i run bk2.2 using config 2, which has the following bytes
cw
ird= ox20020004
bk=ox00942d24
get the follwing error
traget communication error: unable to put target into backbround
get the same error when i use samsung debug tool,,
please help me
I just cant get this darn thing to work, have been at it for weeks know , i have a sammy 2100c tryng to get bk, got a universal jtag from jabs place,
double checked all the connectins on the board , resoldered them alot of times
tdi pin 5 brown
tms pin 7 blue
tck pin 9 black
tdo pin 13 green
vcc pin2 red
gnd pin 20 yelow
the jtag goes into the lpt port on the back of computer, bios setting is on ecp +eep,
turn on the sammy wait till ld20, then press down button, until display goes of and ld40 appears, wait til green lite comes on and o appears on box,
the i run bk2.2 using config 2, which has the following bytes
cw
ird= ox20020004
bk=ox00942d24
get the follwing error
traget communication error: unable to put target into backbround
get the same error when i use samsung debug tool,,
please help me