libedug to change NetID, changed it but still stuck on Ap52

[rimdogg]

Hi guys

Running a pace 1000 in the wembley area of london.
I used libedubug to change the net ID.
This is what i did:
Changed my config file to have 41609.
opened libedebug,
Get Network ID. it brought back 41407
Hit Set Network ID, this then wrote 41609.
rebooted the box.
did a Get Network ID and it brought back 41609.
Booted the box in EM and saw network id as 41609.
but still stuck on AP52

 

[rimdogg]

sorry i meant 41069

 

[Mark_The_Yid]

is symbol rate and freq set correctly?

 

[davidh]

Hi guys

Running a pace 1000 in the wembley area of london.
I used libedubug to change the net ID.
This is what i did:
Changed my config file to have 41609.
opened libedebug,
Get Network ID. it brought back 41407
Hit Set Network ID, this then wrote 41609.
rebooted the box.
did a Get Network ID and it brought back 41609.
Booted the box in EM and saw network id as 41609.
but still stuck on AP52

what is the signal strength like?
try a forced update

 

[rimdogg]

How do i force an update

 

[rimdogg]

I thing symbol rate and freq is set correctly. I havent changed it and it was working before.

is something i need to check. if so how do i know what is the correct one for me

 

[davidh]

I thing symbol rate and freq is set correctly. I havent changed it and it was working before.

is something i need to check. if so how do i know what is the correct one for me

enter engineers menu
looking for the signal should be all green

to do a forced update
hold in the standbye button and turn the power on keep hold untill u get 0000
then release
press the buttons in order favorites will show 4000
then press interactive will show 4300
then press tv guide will show 4320
then press tv will show 4321
then press ok button let it do its thing
it will reboot
let us know what happened

 

[rimdogg]

when i hold in standby button and power on the box, it is get stuck on OHAY and doesnt move from there.

 

[Spectre]

when i hold in standby button and power on the box, it is get stuck on OHAY and doesnt move from there.

You need to press the buttons in the sequence as David has posted above.

 

[rimdogg]

Now its on Trying to tune for NIT
I will let you know what happens

 

[Spectre]

If NetID, frequency etc. are set correctly it could be a signal or tuner fault.

Are there any red status bars on the signal pages?

It should get the NIT in a couple of seconds.

 

[rimdogg]

This box is stuck now on TRYING TO TUNE FOR NIT....
what else can i do

 

[rimdogg]

Ok
The NetID seems to be set fine to 41069
How do I know what the correct frequency should be.
on the first page of my EM menu, I have a red bar with No it for "CAN SEE EMMS"

 

[Spectre]

Frequency used to depend on your area but I think they were changing it to be the same, I'm not sure.