Liams Enigma transponders but no channels?

P4TCA

'Stupid Scottish White Guy'
Joined
Jul 21, 2005
Messages
888
Reaction score
8
Location
SCOTLAND
I have been playing with Liams Enigma to try and resurrect a suspected faulty tuner. The manual scan picked up 118 transponders but no channels. The signal readings after the transponder is found are

SNR 94%
AGC 60%
BER 50-110

Should I try a bruteforce scan ( how do you get enigma IP address/net setings to ftp bruteforce) or is there anything else I could try?
 
S

Speedy2206

Guest
Bruteforce option is already in the image I believe. You can edit the network settings by going into: Main Menu-->Setup-->Expert Setup-->Communications.

I think that your tuner is probably 100% faulty; not just 'suspected'. Have you tried other images and got similar results?

Liam
 

P4TCA

'Stupid Scottish White Guy'
Joined
Jul 21, 2005
Messages
888
Reaction score
8
Location
SCOTLAND
Yes m8, Is it knackered even althought it picks up the transponders? I must have saved an older image.
 

P4TCA

'Stupid Scottish White Guy'
Joined
Jul 21, 2005
Messages
888
Reaction score
8
Location
SCOTLAND
I have posted the bootlog for the box, I have highlighted the area seems dodgey to me anybody capable of translating whats wrong or how if possible fix it?
~debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-b1.04.1a.07.00.00-4b
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ........... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 657650 bytes loaded to 0x100000
Linux version 2.4.31-dbox2 ([email protected]) (gcc version 3.4.4) #2 Fr Nov 11 eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1c:b2:0e
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x00800000 : "root (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cramfs: wrong magic
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 11, console /dev/console: '/etc/init.d/rcS'ti-call b
Using /lib/modules/2.4.31-dbox2/misc/tuxbox.o
Detected STB:
Vendor: Nokia
Model: D-BOX2
Using /lib/modules/2.4.31-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.31-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.31-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.31-dbox2/misc/ves1820.o
Using /lib/modules/2.4.31-dbox2/misc/ves1x93.o
Using /lib/modules/2.4.31-dbox2/misc/avs.o
Using /lib/modules/2.4.31-dbox2/misc/saa7126.o
Using /lib/modules/2.4.31-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.31-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.31-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.31-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.31-dbox2/misc/aviaEXT.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_proc.o
avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2003/09/25 12:24:00 Skars & Merandos
Exp $
avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension
options:
(demux reinit) enx_reset=1
(framer chan.) fc_reset=1
(clr avia reg) avia=1
(enx td trace) trace=0
(lock, unlock) spinlock=0
Schreiben ueber avia_gt.o
(delay) delay=10
Using /lib/modules/2.4.31-dbox2/misc/multicam.o
DBox2 Multicam Driver v1.01 skars & doz21 :)



Using /lib/modules/2.4.31-dbox2/kernel/net/sunrpc/sunrpc.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/lufs/lufs.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/cifs/cifs.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/smbfs/smbfs.o
Starting pid 119, console /dev/console: '/etc/init.d/start'

Please press Enter to activate this console. cdkVcInfo $Id: cdkVcInfo.c,v 1.0 20
02/09/26 20:48:26 alexW Exp $

[newcamd-v6.03 04:00:01] compiled Sep 30 2005, 06:44:55
[newcamd-v6.03] CA_SEND_MSG: Remote I/O error
[newcamd-v6.03 04:00:01] Warning: ca device init failed. Slot1 card will be disa
bled
[newcamd-v6.03 04:00:01] loading keys and roms
[newcamd-v6.03 04:00:01] Warning: File /var/tuxbox/scce/ppua couldn't be opened.

[newcamd-v6.03 04:00:02] rsakeylist:26 parse error
[newcamd-v6.03 04:00:02] Warning: File /var/tuxbox/scce/tpscrypt couldn't be ope
ned.
[newcamd-v6.03 04:00:02] nagra au supports roms: 7 10
[newcamd-v6.03 04:00:02] keys and roms loaded
[newcamd-v6.03 04:00:02] cws client UDS:0 connect: No such file or directory
[newcamd-v6.03 04:00:02] cws UDS:0: Connection failed
[newcamd-v6.03 04:00:03] cws 127.0.0.1:10001: Connection refused
<14>Jun 17 04:00:06 camd3: BOXTYPE: 2
<14>Jun 17 04:00:06 camd3: LOG: 2
<14>Jun 17 04:00:06 camd3: UDP_PORT: 20248
<14>Jun 17 04:00:06 camd3: SOCKET: /tmp/camd.sock01
<14>Jun 17 04:00:06 camd3: KEYS: /var/keys/camd3.keys
<14>Jun 17 04:00:06 camd3: SERVERS: /var/keys/camd3.servers
<14>Jun 17 04:00:06 camd3: USERS: /var/keys/camd3.users
<14>Jun 17 04:00:06 camd3: multichannel off
<11>Jun 17 04:00:06 camd3: /dev/dvb/card0/ca1 Device or resource busy
<14>Jun 17 04:00:07 camd3: KeyDB: gestartet
<14>Jun 17 04:00:07 camd3: camd v3.820 - erfolgreich gestartet
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
sh: cannot open /share/keymaps/eng.kmap: No such file
waitpid: No child processes
rm: cannot remove `/hdd/*enigma*': No such file or directory
waitpid: No child processes
rm: cannot remove `/hdd/*rdgd*': No such file or directory
waitpid: No child processes
rm: cannot remove `/hdd/*camd3*': No such file or directory
waitpid: No child processes
killall: nmbd: no process killed
rm: cannot remove `/hdd/*evocamd*': No such file or directory
waitpid: No child processes
killall: smbd: no process killed
waitpid: No child processes
sh: smbd: not found
waitpid: No child processes
sh: nmbd: not found
rm: cannot remove `/hdd/*newcamd*'waitpid: No child processes
: No such file or directory
waitpid: No child processes
waitpid: No child processes
 

mgwhizz

Inactive User
Joined
Oct 25, 2005
Messages
11
Reaction score
0
Hi P4TCA,

the line "[newcamd-v6.03] CA_SEND_MSG: Remote I/O error" from your bootlog is very similar to "[camd] CA_SEND_MSG: Remote I/O error".

mgb would definitely be the best person to confirm this, but if I read his previous responses correctly, there may be an issue with the SEC chip.

just my 2p worth

mg
 
S

Speedy2206

Guest
Yes, these are the same errors. The only difference is the [newcamd-v6.03] and [camd] parts, which relate to the softcam being used in that particular image. If mgb says that the sec chip was faulty on the other box, then this is also true for this[i/] box unfortunately.

Liam
 

P4TCA

'Stupid Scottish White Guy'
Joined
Jul 21, 2005
Messages
888
Reaction score
8
Location
SCOTLAND
Thanks again guys, need to consider my next move.
 
TEST
Top