I plug the usb key in the front usb of the ibox4 and then turn the backwitch on and it's still in it 45min after turn it on.
I would try the other link but still can't download for now, but you can send it directly to my email at [email protected]
some have said that it need to be in the vuplus/solo folder and others said that it should be
in vuplus/duo folder so I've created both folders with same files in them.
If you tried this way:
You must have format in fat32
you must have the vuplus folder
and must have the solo "and" duo folders in the vuplus folder
I've read that you must plug it into the front usb of the ibox but mine only worked in the back usb of the ibox4
Try it exactly like this
1-turn off the ibox
2-plug the usb key in (try front and if it doen't work try it on back like me)
3-turn on the ibox4
4-look at the usb key light, it should be blinking not for long
5-when it stop blinking, take it out
6-then turn off the ibox4 not before this stage
7-turn on the ibox4 again and wait 5 to 15 minutes before touching your remote control
it should turn blue
If it doesn't work I don't have any ideas because I'm a newbe too.
But Maybe trying some other builders like: blackhole, openpli, openspa, openvix, zeus.
Let me know if you need them to do some try, I could send them to you if you post your email.
If ur usb flashes there is a chance its being read, leave it in there for a bit or else its a jtag job im afraid
yes put USB in back bottom slot power up receiver wait 10 mins. Turn power off - remove usb chip - turn power on. This should work - beware no screen activity - wait the 10 mins. Fulling out too early could brick it.
has there been anyone that has fixed this issue
We use essential cookies to make this site work, and optional cookies to enhance your experience.