Funcard tut

[Erbs]

Hi all, i'm after a funcard 4 tut as have not done one for a long time and need some help basically

regards

Da ERBS

 

[minder_sas]

do they still work,as im not sure they have for some time now

treid one today with latest code card works but doesnt update been in for an hour or so

 

[de51gn]

Funcard 4 still working, did mine yesterday still working.
As far as tuts go the following help me out alot, & also alot of help from andyfux.

Replacing the flash should be fine, as thats what others have done.

Also seen a few doing the following method

1. Get the flash

2. Make "Ext. EEprom" using toxic7_ExtEEgen with your BK, IRD ( 12 or 3E first) and CamID. Remember to click the "c&w" button at the bottom. Save this bin file as your ext eeprom.

3. Use SwapBinHex to convert it to hex file.

4. Now write both files onto the funcard.

Ext EEprom and then the New Flash file, in that order.

Put your box on BBC1 and turn it off. Then put the card in and turn the box on again. Let it update for 10min.


Note: Dont put any keys in Toxic and dont put the funcard in while the box is on


Note. For CamID i used 24 48 56 72 because i live i pure area. This will be different if you live in C&w area's.

Hope that helps.

 

[Erbs]

need help here fellas

 

[quick_silver]

read ur external hex save it ,
wipe the card flash the new 3.7 and rewrite ur saved external image which contains ur bk and ird

saves messing about with toxic ect ect