gizmoworld
Inactive User
- Joined
- Feb 12, 2006
- Messages
- 472
- Reaction score
- 3
Trying to do my first epc2100 got it all setup with cable and open up hyperterminal and checked all settings as in tut then when prompted i press p and im doing it quick, but all i get is this
BCM3349A0
100000010346890
MemSize: ......................... 8M
Flash detected @0xbe000000
Signature: 2100
Broadcom BootLoader Version: 2.1.6d release Gnu
Build Date: Apr 27 2004
Build Time: 22:22:16
Image 1 Program Header:
Signature: 2100
Control: 0005
Major Rev: 0003
Minor Rev: 0000
Build Time: 2006/7/21 04:34:53 Z
File Length: 856916 bytes
Load Address: 80010000
Filename: epc2100R2-v202r1256a-060303.bin
HCS: 43eb
CRC: 290edc04
Image 2 Program Header:
Signature: 2100
Control: 0005
Major Rev: 0003
Minor Rev: 0000
Build Time: 2006/7/21 04:34:53 Z
File Length: 856916 bytes
Load Address: 80010000
Filename: epc2100R2-v202r1256a-060303.bin
HCS: 43eb
CRC: 290edc04
Enter '1', '2', or 'p' within 2 seconds or take default...
. .
Performing CRC on Image 2...
Detected LZMA compressed image... decompressing...
Target Address: 0x80010000
.............
Decompressed length: 3407944
Executing Image 2...
eCos - hal_diag_init
Init device '/dev/ttydiag'
Init tty channel: 8031ed28
Init device '/dev/tty0'
Init tty channel: 8031ed48
Init device '/dev/haldiag'
HAL/diag SERIAL init
Init device '/dev/ser0'
BCM 33XX SERIAL init - dev: 0.2
Set output buffer - buf: 80350b30 len: 2048
Set input buffer - buf: 80351330 len: 2048
BCM 33XX SERIAL config
Reading Permanent settings from non-vol...
Checksum for permanent settings: 0x426c9a61
Settings were read and verified.
Reading Dynamic settings from non-vol
any advice appreciated, thanx!!
BCM3349A0
100000010346890
MemSize: ......................... 8M
Flash detected @0xbe000000
Signature: 2100
Broadcom BootLoader Version: 2.1.6d release Gnu
Build Date: Apr 27 2004
Build Time: 22:22:16
Image 1 Program Header:
Signature: 2100
Control: 0005
Major Rev: 0003
Minor Rev: 0000
Build Time: 2006/7/21 04:34:53 Z
File Length: 856916 bytes
Load Address: 80010000
Filename: epc2100R2-v202r1256a-060303.bin
HCS: 43eb
CRC: 290edc04
Image 2 Program Header:
Signature: 2100
Control: 0005
Major Rev: 0003
Minor Rev: 0000
Build Time: 2006/7/21 04:34:53 Z
File Length: 856916 bytes
Load Address: 80010000
Filename: epc2100R2-v202r1256a-060303.bin
HCS: 43eb
CRC: 290edc04
Enter '1', '2', or 'p' within 2 seconds or take default...
. .
Performing CRC on Image 2...
Detected LZMA compressed image... decompressing...
Target Address: 0x80010000
.............
Decompressed length: 3407944
Executing Image 2...
eCos - hal_diag_init
Init device '/dev/ttydiag'
Init tty channel: 8031ed28
Init device '/dev/tty0'
Init tty channel: 8031ed48
Init device '/dev/haldiag'
HAL/diag SERIAL init
Init device '/dev/ser0'
BCM 33XX SERIAL init - dev: 0.2
Set output buffer - buf: 80350b30 len: 2048
Set input buffer - buf: 80351330 len: 2048
BCM 33XX SERIAL config
Reading Permanent settings from non-vol...
Checksum for permanent settings: 0x426c9a61
Settings were read and verified.
Reading Dynamic settings from non-vol
any advice appreciated, thanx!!