BootLoader Version: 3.1.6d

wardie.88

wardie.88

Banned
Joined
Jul 27, 2007
Messages
72
Reaction score
0
Location
notts
BCM3349A0
100000010346890
MemSize: ......................... 8M
Flash detected @0xbe000000

Signature: a603


Broadcom BootLoader Version: 3.1.6d release Gnu
Build Date: May 30 2007
Build Time: 09:18:45

Image 1 Program Header:
Signature: a603
Control: 0005
Major Rev: 0000
Minor Rev: 0000
Build Time: 2007/6/29 09:55:05 Z
File Length: 935084 bytes
Load Address: 80010000
Filename: ecram_sto.bin
HCS: 27c9
CRC: 335c0056


HCS failed on Image 2 Program Header

Performing CRC on Image
Detected LZMA compressed image... decompressing...
Target Address: 0x80010000
..............
Decompressed length: 3670282

Executing Image 1...


eCos - hal_diag_init
Init device '/dev/ttydiag'
Init tty channel: 8035d068
Init device '/dev/tty0'
Init tty channel: 8035d088
Init device '/dev/haldiag'
HAL/diag SERIAL init
Init device '/dev/ser0'
BCM 33XX SERIAL init - dev: 0.2
Set output buffer - buf: 80391980 len: 2048
Set input buffer - buf: 80392180 len: 2048
BCM 33XX SERIAL config
Current Boot Image : 1
file length=
program header length :92
Flash driver opened.
Total Parse 25 element
ParseTLV Successd !

Reading Permanent settings from non-vol...
Checksum for permanent settings: 0x93178e

*
*
* One or more of the settings groups was upgraded.
*
*
Settings were read and verified.


Reading Dynamic settings from non-vol...
Checksum for dynamic settings: 0x433d9ee5
Settings were read and verified.

boot loader version = 3164
Tag : 11, Length : 1, Value =1
Tag : 12, Length : 1, Value =1
Tag : 13, Length : 1, Value =1
Tag : 14, Length : 1, Value =0
Tag : 15, Length : 1, Value =0
Tag : 16, Length : 1, Value =0
Tag : 17, Length : 1, Value =0
Tag : 18, Length : 1, Value =1
Tag : 19, Length : 1, Value =1
Tag : 1a, Length : 1, Value =1
Tag : 1b, Length : 1, Value =0
Tag : 1c, Length : 1, Value =0
Tag : 1d, Length : 1, Value =0
Tag : 1e, Length : 1, Value =0
Tag : 29, Length : 1, Value =1
Tag : 2d, Length : 1, Value =3
Tag : 64, Length : 120, Value =41 4d 42 49 54 20 45 75 72 6f 20 44 4f 43 5
9 53 20 32 2e 30 20 43 61 62 6c 65 20 4d 6f 64 65 6d 20 3c 3c 48 57 5f 52 45 56
3a 20 31 2e 31 39 3b 20 56 45 4e 44 4f 52 3a 20 41 4d 42 49 54 3b 20 42 4f 4f 54
52 3a 20 33 2e 31 2e 36 64 3b 20 53 57 5f 52 45 56 3a 20 32 2e 39 34 2e 31 30 3
1 34 3b 20 4d 4f 44 45 4c 3a 20 45 30 38 43 30 30 37 3e 3e 0 0 0 0 0
Tag : 6a, Length : 8, Value =33 2e 31 2e 36 64 0 0
Tag : 6b, Length : 8, Value =31 2e 31 39 0 0 0 0
Tag : 65, Length : 16, Value =32 2e 39 34 2e 31 30 31 34 0 0 0 0 0 0 0
Tag : 66, Length : 16, Value =32 2e 39 34 2e 31 30 31 34 0 0 0 0 0 0 0
Tag : 67, Length : 24, Value =31 2e 33 2e 36 2e 31 2e 34 2e 31 2e 34 36 38 34
2e 32 2e 31 2e 36 0 0
Tag : 68, Length : 44, Value =41 6d 62 69 74 20 63 61 62 6c 65 6d 6f 64 65 6d
20 61 67 65 6e 74 20 76 65 72 73 69 6f 6e 20 32 0 0 0 0 0 0 0 0 0 0 0 0
Tag : 69, Length : 28, Value =31 2e 33 2e 36 2e 31 2e 34 2e 31 2e 34 36 38 34
2e 32 2e 33 2e 31 2e 31 2e 32 2e 31

vvv Interface creation and driver startup beginning vvv

-> Begin DOCSIS CM WAN interface
Creating HAL object for the DOCSIS CableModem interface
numFreqPlan 4
Registering DOCSIS CableModem driver
0000000 - The DS Channel List is being updated (RFI-N-03.0086).
0000001 - The list is empty; adding a single default scanning entry.
-> End DOCSIS CM WAN interface

-> Begin Ethernet LAN interfaces
Creating HAL object for the Ethernet interface
Registering Ethernet driver
-> End Ethernet LAN interfaces

-> Begin USB LAN interface
Creating HAL object for the USB 1.1 interface
Registering USB driver
0000002 - CM HAL reports h/w support for PHS, bitmask=3
0000003 - CM HAL reports h/w support for PHS, size=64
-> End USB LAN interface

-> Begin IP Stack interfaces
-> Starting V2 DHCP Client subsystem...
Creating HAL object for IP Stack1 (MAC Addr=00:0e:9b:e8:8a:16)
Registering IP Stack1 driver

Creating HAL object for IP Stack2 (MAC Addr=00:02:8a:de:ad:02)
Registering IP Stack2 driver

IP Stack3 not enabled or failed to create and start interface; no other
stacks will be loaded.
-> End IP Stack interfaces

^^^ Interface creation and driver startup complete ^^^

Propane version: 2.0.1 (28 Oct 2002)
DON'T think we need to go here - so don't:::: init_mib !!!!
WARNING: netsnmp_brcm_create_tstring called with no address!
Creating SNMP agent cablemodem agent
Creating SNMP agent CPE diag agent
0000004 - Successfully added MAC Management address to CAM
0000005 - Interface 10 additional registra
************************************
*** Start up CPU load monitor module
************************************


*
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* * * *
* * * * * * ***
* * * * * * * * *******************
* * * * * *
* *

Broadcom Corporation Reference Design

+----------------------------------------------------------------------------+
| _/_/ _/_/_/_/ _/_/ |
| _/ _/ _/ _/ _/ Broadband |
| _/ _/ _/ _/ |
| _/_/ _/_/_/ _/ Foundation |
| _/ _/ _/ _/ |
| _/ _/ _/ _/ _/ Classes |
| _/_/_/ _/ _/_/ |
| |
| Copyright (c) 1999 - 2005 Broadcom Corporation |
| |
| Revision: 3.9.32 RELEASE |
| |
| Features: MinimalConsole Nonvol Slim HeapManager SNMP Networking USB1.1 |
+----------------------------------------------------------------------------+
| Standard Embedded Target Support for BFC |
| |
| Copyright (c) 2003-2004 Broadcom Corporation |
| |
| Revision: 3.0.1 RELEASE |
| |
| Features: PID=0xa603 Bootloader-Rev=3.1.6d |
| Features: Bootloader-Compression-Support=0x19 |
+----------------------------------------------------------------------------+
| eCos BFC Application Layer |
| |
| Copyright (c) 1999 - 2004 Broadcom Corporation |
| |
| Revision: 3.0.2 RELEASE |
| |
| Features: eCos Console Cmds, (no Idle Loop Profiler) |
+----------------------------------------------------------------------------+
| _/_/ _/ _/ |
| _/ _/ _/_/ _/_/ DOCSIS Cable Modem |
| _/ _/ _/ _/ |
| _/ _/ _/ |
| _/ _/ _/ |
| _/ _/ _/ _/ |
| _/_/ _/ _/ |
| |
| Copyright (c) 1999 - 2005 Broadcom Corporation |
| |
| Revision: 3.9.32 RELEASE |
| |
| Features: AckCel(tm) DOCSIS 1.0/1.1/2.0 Propane(tm) CM SNMP w/Factory MIB |
| Features: Support CM Vendor Extension |
+----------------------------------------------------------------------------+
| Broadcom Data-Only CM Vendor Extension |
| |
| Copyright (c) 1999 - 2004 Broadcom Corporation |
| |
| Revision: 3.6.2 RELEASE |
| |
| Features: DHCP Server HTTP Server OSS2-N-03025 Visualization LED |
| Features: Controller |
+----------------------------------------------------------------------------+
| Build Date: Jun 29 2007 |
| Build Time: 17:55:00 |
| Built By: alex |
| Firmware version : 2.94.1014 |
| Hidden version : 2.94.1014 |
+----------------------------------------------------------------------------+

Disable console output


is there anyway round this without buyin a tsop programmer it does not have the p option
 
wardie.88 said:
BCM3349A0
100000010346890
MemSize: ......................... 8M
Flash detected @0xbe000000

Signature: a603


Broadcom BootLoader Version: 3.1.6d release Gnu
Build Date: May 30 2007
Build Time: 09:18:45

Image 1 Program Header:
Signature: a603
Control: 0005
Major Rev: 0000
Minor Rev: 0000
Build Time: 2007/6/29 09:55:05 Z
File Length: 935084 bytes
Load Address: 80010000
Filename: ecram_sto.bin
HCS: 27c9
CRC: 335c0056


HCS failed on Image 2 Program Header

Performing CRC on Image
Detected LZMA compressed image... decompressing...
Target Address: 0x80010000
..............
Decompressed length: 3670282

Executing Image 1...


eCos - hal_diag_init
Init device '/dev/ttydiag'
Init tty channel: 8035d068
Init device '/dev/tty0'
Init tty channel: 8035d088
Init device '/dev/haldiag'
HAL/diag SERIAL init
Init device '/dev/ser0'
BCM 33XX SERIAL init - dev: 0.2
Set output buffer - buf: 80391980 len: 2048
Set input buffer - buf: 80392180 len: 2048
BCM 33XX SERIAL config
Current Boot Image : 1
file length=
program header length :92
Flash driver opened.
Total Parse 25 element
ParseTLV Successd !

Reading Permanent settings from non-vol...
Checksum for permanent settings: 0x93178e

*
*
* One or more of the settings groups was upgraded.
*
*
Settings were read and verified.


Reading Dynamic settings from non-vol...
Checksum for dynamic settings: 0x433d9ee5
Settings were read and verified.

boot loader version = 3164
Tag : 11, Length : 1, Value =1
Tag : 12, Length : 1, Value =1
Tag : 13, Length : 1, Value =1
Tag : 14, Length : 1, Value =0
Tag : 15, Length : 1, Value =0
Tag : 16, Length : 1, Value =0
Tag : 17, Length : 1, Value =0
Tag : 18, Length : 1, Value =1
Tag : 19, Length : 1, Value =1
Tag : 1a, Length : 1, Value =1
Tag : 1b, Length : 1, Value =0
Tag : 1c, Length : 1, Value =0
Tag : 1d, Length : 1, Value =0
Tag : 1e, Length : 1, Value =0
Tag : 29, Length : 1, Value =1
Tag : 2d, Length : 1, Value =3
Tag : 64, Length : 120, Value =41 4d 42 49 54 20 45 75 72 6f 20 44 4f 43 5
9 53 20 32 2e 30 20 43 61 62 6c 65 20 4d 6f 64 65 6d 20 3c 3c 48 57 5f 52 45 56
3a 20 31 2e 31 39 3b 20 56 45 4e 44 4f 52 3a 20 41 4d 42 49 54 3b 20 42 4f 4f 54
52 3a 20 33 2e 31 2e 36 64 3b 20 53 57 5f 52 45 56 3a 20 32 2e 39 34 2e 31 30 3
1 34 3b 20 4d 4f 44 45 4c 3a 20 45 30 38 43 30 30 37 3e 3e 0 0 0 0 0
Tag : 6a, Length : 8, Value =33 2e 31 2e 36 64 0 0
Tag : 6b, Length : 8, Value =31 2e 31 39 0 0 0 0
Tag : 65, Length : 16, Value =32 2e 39 34 2e 31 30 31 34 0 0 0 0 0 0 0
Tag : 66, Length : 16, Value =32 2e 39 34 2e 31 30 31 34 0 0 0 0 0 0 0
Tag : 67, Length : 24, Value =31 2e 33 2e 36 2e 31 2e 34 2e 31 2e 34 36 38 34
2e 32 2e 31 2e 36 0 0
Tag : 68, Length : 44, Value =41 6d 62 69 74 20 63 61 62 6c 65 6d 6f 64 65 6d
20 61 67 65 6e 74 20 76 65 72 73 69 6f 6e 20 32 0 0 0 0 0 0 0 0 0 0 0 0
Tag : 69, Length : 28, Value =31 2e 33 2e 36 2e 31 2e 34 2e 31 2e 34 36 38 34
2e 32 2e 33 2e 31 2e 31 2e 32 2e 31

vvv Interface creation and driver startup beginning vvv

-> Begin DOCSIS CM WAN interface
Creating HAL object for the DOCSIS CableModem interface
numFreqPlan 4
Registering DOCSIS CableModem driver
0000000 - The DS Channel List is being updated (RFI-N-03.0086).
0000001 - The list is empty; adding a single default scanning entry.
-> End DOCSIS CM WAN interface

-> Begin Ethernet LAN interfaces
Creating HAL object for the Ethernet interface
Registering Ethernet driver
-> End Ethernet LAN interfaces

-> Begin USB LAN interface
Creating HAL object for the USB 1.1 interface
Registering USB driver
0000002 - CM HAL reports h/w support for PHS, bitmask=3
0000003 - CM HAL reports h/w support for PHS, size=64
-> End USB LAN interface

-> Begin IP Stack interfaces
-> Starting V2 DHCP Client subsystem...
Creating HAL object for IP Stack1 (MAC Addr=00:0e:9b:e8:8a:16)
Registering IP Stack1 driver

Creating HAL object for IP Stack2 (MAC Addr=00:02:8a:de:ad:02)
Registering IP Stack2 driver

IP Stack3 not enabled or failed to create and start interface; no other
stacks will be loaded.
-> End IP Stack interfaces

^^^ Interface creation and driver startup complete ^^^

Propane version: 2.0.1 (28 Oct 2002)
DON'T think we need to go here - so don't:::: init_mib !!!!
WARNING: netsnmp_brcm_create_tstring called with no address!
Creating SNMP agent cablemodem agent
Creating SNMP agent CPE diag agent
0000004 - Successfully added MAC Management address to CAM
0000005 - Interface 10 additional registra
************************************
*** Start up CPU load monitor module
************************************


*
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* * * *
* * * * * * ***
* * * * * * * * *******************
* * * * * *
* *

Broadcom Corporation Reference Design

+----------------------------------------------------------------------------+
| _/_/ _/_/_/_/ _/_/ |
| _/ _/ _/ _/ _/ Broadband |
| _/ _/ _/ _/ |
| _/_/ _/_/_/ _/ Foundation |
| _/ _/ _/ _/ |
| _/ _/ _/ _/ _/ Classes |
| _/_/_/ _/ _/_/ |
| |
| Copyright (c) 1999 - 2005 Broadcom Corporation |
| |
| Revision: 3.9.32 RELEASE |
| |
| Features: MinimalConsole Nonvol Slim HeapManager SNMP Networking USB1.1 |
+----------------------------------------------------------------------------+
| Standard Embedded Target Support for BFC |
| |
| Copyright (c) 2003-2004 Broadcom Corporation |
| |
| Revision: 3.0.1 RELEASE |
| |
| Features: PID=0xa603 Bootloader-Rev=3.1.6d |
| Features: Bootloader-Compression-Support=0x19 |
+----------------------------------------------------------------------------+
| eCos BFC Application Layer |
| |
| Copyright (c) 1999 - 2004 Broadcom Corporation |
| |
| Revision: 3.0.2 RELEASE |
| |
| Features: eCos Console Cmds, (no Idle Loop Profiler) |
+----------------------------------------------------------------------------+
| _/_/ _/ _/ |
| _/ _/ _/_/ _/_/ DOCSIS Cable Modem |
| _/ _/ _/ _/ |
| _/ _/ _/ |
| _/ _/ _/ |
| _/ _/ _/ _/ |
| _/_/ _/ _/ |
| |
| Copyright (c) 1999 - 2005 Broadcom Corporation |
| |
| Revision: 3.9.32 RELEASE |
| |
| Features: AckCel(tm) DOCSIS 1.0/1.1/2.0 Propane(tm) CM SNMP w/Factory MIB |
| Features: Support CM Vendor Extension |
+----------------------------------------------------------------------------+
| Broadcom Data-Only CM Vendor Extension |
| |
| Copyright (c) 1999 - 2004 Broadcom Corporation |
| |
| Revision: 3.6.2 RELEASE |
| |
| Features: DHCP Server HTTP Server OSS2-N-03025 Visualization LED |
| Features: Controller |
+----------------------------------------------------------------------------+
| Build Date: Jun 29 2007 |
| Build Time: 17:55:00 |
| Built By: alex |
| Firmware version : 2.94.1014 |
| Hidden version : 2.94.1014 |
+----------------------------------------------------------------------------+

Disable console output


is there anyway round this without buyin a tsop programmer it does not have the p option
Click to expand...
well thats interesting !!! i thought u said u got softjtag to work on 250-255 with original f/w? i guess its a tsop job then
 
i did lol am not even bullsh*tin but this is the only one thats bein funny
 
wardie.88 said:
i did lol am not even bullsh*tin but this is the only one thats bein funny
Click to expand...

The stock NTL firmware has console disabled and no telnet (Telnet is not even compiled into any of the images).

You must of confused yourself by using it with the Infinite firmware.
 
yh i did lol i got confused it was infinite v*rg*n are gettin pricks am gonna have to buy a willem can some nice person point me in the right direction where to get one from with the right socket for the 250 255 also will this work on a currupt 200 flash thanx:BLOBBY:
 
You must log in or register to reply here.

Similar threads

S
help to understand log
Replies
1
Views
792
acebing
A
joe516
    • Like
2020 Virtual Grand National line-up
Replies
1
Views
2K
melttc
melttc
Napster
    • Like
DW Lottery Saturday 30th
Replies
7
Views
536
gez
gez
Napster
    • Like
DW Lottery Saturday 7th, 14th and 21st December
2
Replies
31
Views
2K
gez
gez
Napster
    • Like
DW Lottery, Saturday 2nd
2
Replies
20
Views
1K
thomasjcat
thomasjcat
Back
Top