Can I do this sat set up????

[suttsy]

Hey all,
I'm seeking a bit of advice as to what type of setup I can have.


1st off, my current situation:
I have a motorized dish connected to a Vu Solo in one room.
I have a Solo2 connected to a Sly dish on 28.2 twin cable in another room & another solo single cable in the bedroom .


What I'm hoping to do:
Put a quad Lnb on the motor, which I know can only be commanded by one STB, ie solo2
Run one cable to the Solo2 from motor & 1 cable from sly sat.
Run 2 more cables from the motor to the 2 other solo stb's but I still want them to connect to the Sly sat also,.


Any help with advice on this would be much appreciated, i.e do I need multi switches for the single tuner stb's.


Suttsy

 

[digi247]

Run Motor cable to Input 1 on solo2 so that controls the dish then 1 feed from the Sly dish to input 2 sorted.

Run 1 cable form quad motor dish and 1 cable from Sly dish to a 2/1 diseqc switch connect this to Solo Number 1

Repeat above for Solo Number 2 receiver.

If you want more than 1 receiver to control the dish say your Solo2 and one of the Solo's then you would also need a Smart priority switch.