I was in the mood for experimenting today and as the weather was quite nice, I took down my motorised 85cm dish and replaced it with a spare zone2 raven dish I had kicking about and had decided to play about with it. I added one of those multi Lnb brackets you can get for a few quid off fleabay and with some other spare kit I had, I managed to get the thing to pick up 28e & 13e. I aligned the dish with 28e getting a 90% snr rate then fiddled around with the bracket until I got 80% snr off 13e (not bad considering I was getting 89% from it with my motorised setup). Linked in a 2 way DiSEqC switch and all sorted, quite impressed myself I did as I was sceptical if this would work of a Zone2 dish so far North in the UK. Some channels on 13e were still a bit glitchy though so I may try it another way tomorrow, aligning with 13e and using the bracket to find 28e, see if it improves the SNR rates any.
I know this is well discussed on here so thought I would share my success roud:
I know this is well discussed on here so thought I would share my success roud: