Zgemma h2s jtag

gatonico

Inactive User
Joined
Feb 8, 2010
Messages
3
Reaction score
0
I have found Broadband Studio 3 and BCM 97632 as well as a few others thanks to Ferret for his tut on the Cloud boxes :Clap: but having followed the tut by loading BBS 3 on WinXP then plugging in the Cypress USB board it does not find or load any drivers so shows as "disconnected" when its all hooked up to the zgemma h2. I have tried and tried, even read another tut in Italian that said to use the "unistdriver" included in Ferrets files but still no joy. Can anybody shed light on the prob as I have learnt as much as I can but need a little help. :silly:
Hi please you share with me the BCM97362 and BBStudio. i Have the Cypress Board and i searched for a lot of days and not find this programs.

Thank you in advance
 

Krusty

Premium Member
Premium Member
Joined
May 9, 2015
Messages
140
Reaction score
39
Hi please you share with me the BCM97362 and BBStudio. i Have the Cypress Board and i searched for a lot of days and not find this programs.

Thank you in advance
I will try to attach it for you. I think the BCM97362 is in the zip.
 

Attachments

  • bbs_bcm97358_3.0.11119.7.zip
    30.4 MB · Views: 14

gatonico

Inactive User
Joined
Feb 8, 2010
Messages
3
Reaction score
0
I will try to attach it for you. I think the BCM97362 is in the zip.
Newly thank you but not come BCM97362, only come BCM97358 and not is for Zgemma H2S, maybe that you have lost the file in your pc, hehe

If you find it BCM97632, please share it. Thanks for all
 

dikkidave

Inactive User
Joined
Aug 11, 2014
Messages
4
Reaction score
0
Hi, did any one find the BCM97362 files. i need to jtag gigablue ultra ue which has the same chip but cannot find anything.
thanks
 

aldo86

New Member
Joined
Feb 7, 2021
Messages
4
Reaction score
0
Hi all guys...I am writing on this slightly dated thread to know if you have the bcm7362.msi file to be able to recognize the zgemma h2h...I have this bricked decoder and without that file I cannot flash it with bbs3.1...thank you all for any help or answer!
 

topchippyles

DW Member +
Joined
Apr 11, 2014
Messages
141
Reaction score
60
Hi all guys...I am writing on this slightly dated thread to know if you have the bcm7362.msi file to be able to recognize the zgemma h2h...I have this bricked decoder and without that file I cannot flash it with bbs3.1...thank you all for any help or answer!
Should be able to recover it with a usb flash
 

aldo86

New Member
Joined
Feb 7, 2021
Messages
4
Reaction score
0
Thanks for the reply ... would you know how or someone could fsr it for me? Thank you
 

aldo86

New Member
Joined
Feb 7, 2021
Messages
4
Reaction score
0
hello everyone, in your opinion, with orca or other msi file editor, I could modify the bcm7358 file (driver for bbs of cib3) in a file bcm7362 (driver for bbs of zgemma h2h)? Thank you guys
 

topchippyles

DW Member +
Joined
Apr 11, 2014
Messages
141
Reaction score
60
hello everyone, in your opinion, with orca or other msi file editor, I could modify the bcm7358 file (driver for bbs of cib3) in a file bcm7362 (driver for bbs of zgemma h2h)? Thank you guys
Just flash it from a usb or get a new box. The h2h is really old as much better ones about for a reasonable price
 

aldo86

New Member
Joined
Feb 7, 2021
Messages
4
Reaction score
0
Unfortunately, a flash is not enough...the box remains with the rossk led on and no writing...after place (if I can) the screens of the ft232 response...if there is any other procedure to do, I would thank you very much if let me know in detail how.
 
TEST
Top