- Joined
- Sep 16, 2014
- Messages
- 2,601
- Reaction score
- 1,674
I'm thinking those odd few that are having issues with tuner refusing to scan (etc), it is because of the built-in security chip not liking the drivers and refusing to allow channels to be scanned which would then mean a date/time sync happening!
I say this purely because my Sunray Solo2 (the one with a detachable nand flash chip) flashes both original and sunray safe images fine and tuner scan works fine with either original or sunray safe drivers.
However, my Sunray Solo2 refuses to do a scan of channels when the Lonrison v4 drivers are being used. In fact, it results in busy icon appearing and then refusing to stop until a reboot is done. I think the Sunray built-in security chip is obviously not recognising the lonrison v4 drivers and refuses to do a tuner scan to ensure I don't get a date/time sync which could of (but it actually wouldn't) resulted in a bricked box.
I was told by one forum member that their v4 tuner issue was resolved by replacing the rs232 connector/chip and therefore assuming that beforehand it wasn't fully accepting the v4 flash update (despite receiving no error messages) whereas now it works fine.
I say this purely because my Sunray Solo2 (the one with a detachable nand flash chip) flashes both original and sunray safe images fine and tuner scan works fine with either original or sunray safe drivers.
However, my Sunray Solo2 refuses to do a scan of channels when the Lonrison v4 drivers are being used. In fact, it results in busy icon appearing and then refusing to stop until a reboot is done. I think the Sunray built-in security chip is obviously not recognising the lonrison v4 drivers and refuses to do a tuner scan to ensure I don't get a date/time sync which could of (but it actually wouldn't) resulted in a bricked box.
I was told by one forum member that their v4 tuner issue was resolved by replacing the rs232 connector/chip and therefore assuming that beforehand it wasn't fully accepting the v4 flash update (despite receiving no error messages) whereas now it works fine.