usuals problem

[ramraider]

Got a bit of a problem with my tech 1500 it has been set up on usuals for about 2 months now with no problems, today switched the box on and i can c get all satellites from 45w to 8w after that there is nothing say if i goto 28e there is no signal i have to manualy drive the dish east until i find the signal and the same goes for any sat past 8w to , my coordinates are the same 1.7e and 52.9n and i have changed no settings


Any ideas any 1 :Cheers:

 

[chrome307]

Ramraider............have you checked to see if the dish is moving to 'E' when you tell it to on your reciever?

Doublecheck the settings to see if they are set to USALS and not DisEq 1.2 in your Motorised Setup.

At worse you could do a 'Factory Reset' and then enter your co-ordinates back in to setup your box.

Let us know how you get on...........what firmware you using?? I'm still on the 9 Sept 05, with no problems.

 

[ramraider]

Sorted now had to reset everything from scratch