wolftje
DW Regular +
- Joined
- Dec 12, 2008
- Messages
- 1,098
- Reaction score
- 385
Since there has been a lot of questions and emails lately that has been sent to me concerning the new smartcard firmware I4A that has been launched for
more over a week now ... I have decided to write some good - clear info about this. feel free to join of course.
Oh yeah, and some Dutch bullshit Site Named S*t4all decided I could not post some interesting info about how to configure yr oscam correctly because it smelled 2 much about Cardsharing. Anyway the people who know me a bit closer know I'm against such a 'Mob' Server stuff. So if you want to get me pissed you should come with such a cheap execuses ... Go TO H.... M...f ckrs. Anyway, No Dutch information then but in good old plain english.
The info i'm gonna provide will explain how to configure oscam/cccam/newcamd correctly so you can connect very nicely with yr TM network receiver with the nice CCcam client / newcamd client addon into yr dreambox without having your smartcard locking up ....
this info goes for Tv Vlaanderen 0100:00006C, TéléSat 0100:00006D and NL digitaal 0100:00006A
At this very moment the new smartcard updates makes it very hard to even share to more than 2 satellite receivers (Single tuners)
the M7 group(which has all the mentioned packages above and also AustriaSat <- yes really ? !) does not want you to have smartcardsplitters and share inhouse or even share through the internet. they Hate CCcam -lol-.
I have been running several setups.
A good setup at this very moment is using CCcam2.3.0 which comes into 2 flavors.
an E1 version and a E2 version.
If you are gonna use CCcam 2.3.0Server in order to connect with your TM receiver (it is recognized as 2.2.1 client)
be sure to have this in your CCcam.cfg
Disable EMM : no
SID LIMIT: /dev/sci0 4 11
GLOBAL EMM : 1
SECA HANDLER: 1
Notice the Sid Limit, it means that no more than 4 times the smartcard can be asked to give a CW in order to decode the Channel within a given time(here it is 11 secs)
People also mention you should add a list of favorite channels on which this restriction should be.
As an example I can give you this for télésat (not tested)
SID LIMIT: /dev/sci0 4 11 { 1479,147A,1483,1484,01CC,01D0,1485 }
The numbers are the SID of the channels in the package TéléSat.
I find this not interesting because the package of the M7 group is big. Everyone has another flavor. Maybe for TF1, éénTv, Canvas, Vtm, Mtv HD .....
I think you better restrict on the level of HOPS and reshare an choose with who'm you want to share...
For example:
Have 4 tvlaanderen full subs you share
have 4 télésat full subs
have 4 nl digitaal subs
you are 12 all together and you add as you want but with restrictions other people.
Anyway lets keep this on track
more over a week now ... I have decided to write some good - clear info about this. feel free to join of course.
Oh yeah, and some Dutch bullshit Site Named S*t4all decided I could not post some interesting info about how to configure yr oscam correctly because it smelled 2 much about Cardsharing. Anyway the people who know me a bit closer know I'm against such a 'Mob' Server stuff. So if you want to get me pissed you should come with such a cheap execuses ... Go TO H.... M...f ckrs. Anyway, No Dutch information then but in good old plain english.
The info i'm gonna provide will explain how to configure oscam/cccam/newcamd correctly so you can connect very nicely with yr TM network receiver with the nice CCcam client / newcamd client addon into yr dreambox without having your smartcard locking up ....
this info goes for Tv Vlaanderen 0100:00006C, TéléSat 0100:00006D and NL digitaal 0100:00006A
At this very moment the new smartcard updates makes it very hard to even share to more than 2 satellite receivers (Single tuners)
the M7 group(which has all the mentioned packages above and also AustriaSat <- yes really ? !) does not want you to have smartcardsplitters and share inhouse or even share through the internet. they Hate CCcam -lol-.
I have been running several setups.
A good setup at this very moment is using CCcam2.3.0 which comes into 2 flavors.
an E1 version and a E2 version.
If you are gonna use CCcam 2.3.0Server in order to connect with your TM receiver (it is recognized as 2.2.1 client)
be sure to have this in your CCcam.cfg
Disable EMM : no
SID LIMIT: /dev/sci0 4 11
GLOBAL EMM : 1
SECA HANDLER: 1
Notice the Sid Limit, it means that no more than 4 times the smartcard can be asked to give a CW in order to decode the Channel within a given time(here it is 11 secs)
People also mention you should add a list of favorite channels on which this restriction should be.
As an example I can give you this for télésat (not tested)
SID LIMIT: /dev/sci0 4 11 { 1479,147A,1483,1484,01CC,01D0,1485 }
The numbers are the SID of the channels in the package TéléSat.
I find this not interesting because the package of the M7 group is big. Everyone has another flavor. Maybe for TF1, éénTv, Canvas, Vtm, Mtv HD .....
I think you better restrict on the level of HOPS and reshare an choose with who'm you want to share...
For example:
Have 4 tvlaanderen full subs you share
have 4 télésat full subs
have 4 nl digitaal subs
you are 12 all together and you add as you want but with restrictions other people.
Anyway lets keep this on track
Last edited: