axeman
Inactive User
Hi, I wonder if anyone has come across this before:
I tried to flash my dbox with Andromeda 2.0 image but it seems to have failed.
It is now stuck on "loading kernal" when I try to boot it.
I have searched the forum and tried all possible options that I can see.
I have tried various ways to flash it but have been unsuccessful.
These are the ways I have tried:
1. Via IFA, null-modem and cross-over cable
2. Via IFA and cross-over cable
3. via Hyper terminal and cross-over cable or null-modem
4. via cross-over cable
When using IFA the log just shows the IFA initialisation but it does see the dbox's IP address.
------ Extra Informations ------
Selected Network adapter: 3Com EtherLink XL 10/100 PCI For Complete PC Management NIC (3C905C-TX) #2 - Packet Scheduler Miniport (0)
IP-Adress of the Network Adapter: 192.168.0.3
IP-Adress of the Dbox: 192.168.0.202
Comport: Communications Port (COM2)
Operatingsystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: Intel(R) Pentium(R) 4 CPU 1300MHz @ 1300 MHz
Filename of the Images: digitalworldzUK_02.img
Imagetype: Two Flashs
DBOX-IFA Version: 2.3
------ Powered by http://www.dboxservice-hallenberg.de ------
I set the network card to 10Mps-half duplex as well and disabled AV, firewall....
I have also tried the various ways of resetting the dbox during the IFA flash process and flashing with different images.
I have tried flashing from my laptop and PC both running windows XP and IFA 2.2. None of them work.
Using the various null-modem cables the dbox seems to get stuck on the initial screen after the "Betaresearch" screen. The one that shows various code.
With the various cross-over cables that I have tried the dbox stops on the "loading kernal" message.
Does anyone know of any other way to wipe out the current image?
I tried to flash my dbox with Andromeda 2.0 image but it seems to have failed.
It is now stuck on "loading kernal" when I try to boot it.
I have searched the forum and tried all possible options that I can see.
I have tried various ways to flash it but have been unsuccessful.
These are the ways I have tried:
1. Via IFA, null-modem and cross-over cable
2. Via IFA and cross-over cable
3. via Hyper terminal and cross-over cable or null-modem
4. via cross-over cable
When using IFA the log just shows the IFA initialisation but it does see the dbox's IP address.
------ Extra Informations ------
Selected Network adapter: 3Com EtherLink XL 10/100 PCI For Complete PC Management NIC (3C905C-TX) #2 - Packet Scheduler Miniport (0)
IP-Adress of the Network Adapter: 192.168.0.3
IP-Adress of the Dbox: 192.168.0.202
Comport: Communications Port (COM2)
Operatingsystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: Intel(R) Pentium(R) 4 CPU 1300MHz @ 1300 MHz
Filename of the Images: digitalworldzUK_02.img
Imagetype: Two Flashs
DBOX-IFA Version: 2.3
------ Powered by http://www.dboxservice-hallenberg.de ------
I set the network card to 10Mps-half duplex as well and disabled AV, firewall....
I have also tried the various ways of resetting the dbox during the IFA flash process and flashing with different images.
I have tried flashing from my laptop and PC both running windows XP and IFA 2.2. None of them work.
Using the various null-modem cables the dbox seems to get stuck on the initial screen after the "Betaresearch" screen. The one that shows various code.
With the various cross-over cables that I have tried the dbox stops on the "loading kernal" message.
Does anyone know of any other way to wipe out the current image?