Ok folks got myself geared up with a new infinity usb programmer and ATMega 163 cards, to try and resurrect my 2 old pace Di1010 phase 1b box’s, so far I have downloaded loads of tutorials, guides, software and bits and bobs, some of which I was advised in my first post about getting these box’s back up and running other stuff I have downloaded after reading some of the guides. It just seems to get to the point where the more I read the more I seem to get confused?
Now I have checked that my Bk and ird are correct so everything fine there. I have the box’s powered up and I can get all free view channels but nothing encrypted I have tried using several guides for programming my cards in attempting to get these box’s working but to no avail.
Anyway I tried loading APE v2 5ATW.hex as the flash also tried TW RST 01.06.07.hex and ATMEGA_TW_16_08_2006.HEX now as for the ext eeprom I first off used file I made up with rippedhex v1 entered my ird forwards and backwards, I have also made a file using toxic 6 and then swap bin hex again using my ird both forward and backwards now I have writing loads of different combinations of these files onto the cards in attempting to get these box’s working but still nothing if anyone could help me it would be greatly appreciated never know in the end I could write a now guide for newbees by a newbee.
if anyone has got some pointers to help me out I would be very grateful I am getting to the point where I am thinking about putting them back in the cupboard and just giving up but the thought that I am missing something simple keeps bugging me and making me want to get it sorted all the more.:comp1:
Now I have checked that my Bk and ird are correct so everything fine there. I have the box’s powered up and I can get all free view channels but nothing encrypted I have tried using several guides for programming my cards in attempting to get these box’s working but to no avail.
Anyway I tried loading APE v2 5ATW.hex as the flash also tried TW RST 01.06.07.hex and ATMEGA_TW_16_08_2006.HEX now as for the ext eeprom I first off used file I made up with rippedhex v1 entered my ird forwards and backwards, I have also made a file using toxic 6 and then swap bin hex again using my ird both forward and backwards now I have writing loads of different combinations of these files onto the cards in attempting to get these box’s working but still nothing if anyone could help me it would be greatly appreciated never know in the end I could write a now guide for newbees by a newbee.
if anyone has got some pointers to help me out I would be very grateful I am getting to the point where I am thinking about putting them back in the cupboard and just giving up but the thought that I am missing something simple keeps bugging me and making me want to get it sorted all the more.:comp1: