softmodded my first 4.2E

[Jenno]

see if this works?

2] Run Any Title Deleter DB
Choose IOS 36 and press A.
Go to System Titles and press A.
Select IOS 222 and press A to delete.
Select IOS 223 and press A to delete.
Select IOS 249 and press A to delete.
Select IOS 250 and press A to delete.
*If any IOS listed above is not there, do not worry about it and move along with the guide.

 

[Dolfiemax]

see if this works?

2] Run Any Title Deleter DB
Choose IOS 36 and press A.
Go to System Titles and press A.
Select IOS 222 and press A to delete.
Select IOS 223 and press A to delete.
Select IOS 249 and press A to delete.
Select IOS 250 and press A to delete.
*If any IOS listed above is not there, do not worry about it and move along with the guide.

i cant select ios 236 although trucha successfully installed - it goes from 249 to 233 etc. ther dont seem to be a 236 ios for deleter to find although its gone through ok with trucha!!

 

[Jenno]

i cant select ios 236 although trucha successfully installed - it goes from 249 to 233 etc. ther dont seem to be a 236 ios for deleter to find although its gone through ok with trucha!!

it says ios36.

also, theres a few 'pages' of ios in ATD you might have to cycle through right on dpad or whatever ;o)

 

[Dolfiemax]

it says ios36.

also, theres a few 'pages' of ios in ATD you might have to cycle through right on dpad or whatever ;o)

i realize that thats what im saying its not there!!

 

[Dolfiemax]

sorted now in the tut it says ios 236 not ios 36 put me off - any idea how to erase pin entry by the way as persons wii has forget what they entered - cheers i tried that title deleter but dont think its in that

 

[Dolfiemax]

Anyone able to get scooby doo first fright to work with this with neogamma r7 i have tried all sorts it just reboots neogamma to wii menu - not seen this before.I also have yaosm 3.2 chip on board and no probs with this though.On another topic if you update past 4.2 firmware as my chip asks chip works fine as with all updates but you will have to run this hack again as it writes over and blocks neogamma r7 again - cheers.

 

[DeadTech]

Rep added to showders and highlander for the install guide and links.
Much appreciated. Install did't go too smooth but a bit of fiddling got me there Not managed to get Neogamma to work but got backup Launcher working fine. Got a bit lost with the different Wads and versions lol, also managed to get mplayers for USB and DVD working. Cheers fine work.

 

[Highlander]

Rep added to showders and highlander for the install guide and links.
Much appreciated. Install did't go too smooth but a bit of fiddling got me there Not managed to get Neogamma to work but got backup Launcher working fine. Got a bit lost with the different Wads and versions lol, also managed to get mplayers for USB and DVD working. Cheers fine work.

cheers for the rep.

neogamma and back-up launcher is the same programme m8.

 

[mrmachinegunn]

maikash2747 - have you made a nand backup mate..? If I were you that`s the first thing I would do.. You seem to be doing a lot of different things.
Did you follow this guide..? Thats the one that kicked this topic off. Worked perfect for me. I didn`t bother with steps 6 or 7. but installed neogamma instead.



Insert the SD card into the Wii.

Run bannerbomb by going to the SD Card menu and choosing yes to load boot.dol/elf
This runs the Hackmii Installer from which you should install the Homebrew Channel, DVDX, and Bootmii as IOS and boot2 if possible.
{Running a custom application with Bannerbomb is the goal here, and in this case is the Hackmii Installer is the boot.elf}

Restart your Wii, if Bootmii was installed as Boot2, then it will show up as soon as the Wii is turned on.
If Bootmii wasn't started then it must be loaded by pressing home in the HBC and clicking Launch Bootmii.
Press the power button on the wii 3 times to get to the last option, then press the reset button. [You can also navigate with a gc controller.]
Press reset to choose the first option, then follow the directions on the screen to make your NAND backup. [Bad blocks are no problem.]
Backup the Bootmii folder elsewhere and erase from the sd card. [or rename it.]
Head back to The Homebrew Channel.


1a] Run Trucha Bug Restorer
Press B to choose No IOS Reload.
Wait till it says Press 1 then press it.
Go to Downgrade IOS15.
Press A to downgrade.
Everytime it says "load IOS from SD" press A.

1b] Run Trucha Bug Restorer
Choose IOS15 and press A. (Important)
Wait till it says Press 1 then press it.
Choose IOS36 menu. In there use these settings:
Install IOS to slot (36)
Hash check (trucha) YES
ES_Identity YES
Nand Permissions YES
Then press A on install patched IOS36.
Everytime it says "load IOS from SD" press A.

1c] Run Trucha Bug Restorer
Choose IOS36 and press A.
Wait till it says Press 1 then press it.
Then Choose restore IOS15.
Press A to restore.
Everytime it says "load IOS from SD" press A.

2] Run Any Title Deleter DB
Choose IOS 36 and press A.
Go to System Titles and press A.
Select IOS 222 and press A to delete.
Select IOS 223 and press A to delete.
Select IOS 249 and press A to delete.
Select IOS 250 and press A to delete.
*If any IOS listed above is not there, do not worry about it and move along with the guide.

3] Run Custom IOS38 Installer
Choose IOS36 and press A.
Choose WAD install and press A.

4a] Run cIOS 222/223 installer v4
Choose IOS 249 for installation.
Install Custom IOS 202 and select IOS38 merged with IOS60.

4b] Run cIOS 222/223 installer v4
Choose IOS 249 for installation.
Install Custom IOS 222 and select IOS38.

4c] Run cIOS 222/223 installer v4
Choose IOS 249 for installation.
Install Custom IOS 223 and select IOS38 merged with IOS37.

5] Run Wad Manager
When it opens choose use IOS249. (it is probably already set to that)
Press A to leave NAND emulator disabled
Press A to open from SD slot.
Install IOS70-64-v6687 [Patched][FreeTheBug].wad and exit.

6] [optional] Run MIOSpatcher to play backup gamecube games.
Press right once on a gamecube controller to change the mios to v8.
Press X to allow Wii backup launcher loading.
Press A to install.

7] [optional] Run Preloader to enable system menu hacks.
Run Preloader .30 to install preloader onto your system
*If the latest version of preloader is not included [revision 3 included in the email], you get it from the phpgeek's thread
Enable desired hacks and go into the settings and make sure the system menu is set to load with IOS70
*The hacks.ini file is located at the apps\preloaderv0.30r3-phpgeek folder

cheers for the guide mate my family and me are gratefull.